Common Parts Numbers

[GutlessSupreme]

Radiator, there is no cross reference for this part, but finding one may be easier with this information (courtesy Jeff M.):

Manufacture, Blackstone out of Canada, sub-contracted to ASC for the TGP setup.
ASC part number: V29X858230XXX
Blackstone part number 1002609
Other Blackstone (?) number 90031601
Core dimensions:
21 1/4 “ width
15 1/4" height
2 1/4" thickness
37 rows
9 fins per inch
3 core (NA GP has single core)

3.4 DOHC windage tray (bolt in with DOHC main studs) - GM 24503912 (GMPD $8.34, tray only)

GM 3 wire heated O2 sensor - GM 25172680 (GMPD $36.39)

Cam Bearings: Federal Mogul 1492M
Rod Bearings: Federal Mogul 4020A
Main Bearings: Federal Mogul 7242MA

Goodridge SS brake lines, '88-'90 W - GS12264 (use for '94+ swap on TGPs as well)
http://www.hrpworld.com - $99.95

Felpro exhaust manifold gaskets - MS93692
Felpro lower engine gasket set - KS2654

Energy Suspension greasable sway bar bushings (when using 34mm front sway bar) - 9.5160G and 9.5167G (http://www.energysuspensionparts.com - $34.97 shipped total)

Oil pump: Melling M95HV (Summit - MEL-M95HV $59.95) - pump drive rod included, pickup not included

Solid rubber lower motor mount - NAPA BK 6121645 (http://www.napaonline.com - $49.88)

[twinturbosedan]

Goodridge SS brake lines, '88-'90 W - GS12264
'94-'97 W - GS12237
(no listing for '91-'93, I figured I'd post the '94+ number for those with the rear brake upgrade)
http://www.hrpworld.com - both $99.95

the '94+ hoses actually won't work on a TGP with '94+ brakes (they are way too short).  you'd still need the '88-'90 style Goodrich hoses for a TGP with '94+ rear brakes.

[Prospeeder]

dont you have to have PMIII specific lines for the rear? Since its one line then splits off, beeing its a 3 channel system?

[Invasion1]

dont you have to have PMIII specific lines for the rear? Since its one line then splits off, beeing its a 3 channel system?

There Brake Hoses not lines, all the hoses are the same even for PMIII TGP's

[GutlessSupreme]

Goodridge SS brake lines, '88-'90 W - GS12264
'94-'97 W - GS12237
(no listing for '91-'93, I figured I'd post the '94+ number for those with the rear brake upgrade)
http://www.hrpworld.com - both $99.95

the '94+ hoses actually won't work on a TGP with '94+ brakes (they are way too short).  you'd still need the '88-'93 style Goodrich hoses for a TGP with '94+ rear brakes.

edited to avoid confusion then. thanks Josh.

[z284pwr]

Does anyone have the part number for the Rear brake distribution valve? 

The number on Chris' site *18015258* doesn't show up on GMPartsDirect.  I put it into PartsAmerica's page they showed it and we ordered it but they can't get it either?  ACDelco doesn't even show the number on their site either?

[mfewtrail]

I finally got around to scanning a small 88-96 "Grand Prix Coupe" parts catalog I have. It has a lot of things that apply to pretty much any W-body from subframe bolts to other misc. items.

17 pages total
http://s44.photobucket.com/albums/f14/platjblser/

[Invasion1]

Thanks Matt

[mfewtrail]

You're welcome. I may start scanning various things of importance from the factory service manual(s) soon(thinking about starting with wiring diagrams).

[mfewtrail]

Two way check valve @ vacuum modulator or for HVAC - "HELP! Part # 47150"  Search the board for the vaccum diagram to see the proper way to install it.

[R Dubya]

OEM sunroof gasket - GM # 12392898

[GOT2B GM]

OEM sunroof gasket - GM # 12392898

awesome I need one of those

[Invasion1]

part number for the Rear Proportioning Valve is 88927272
thanks to Luke 

[GOT2B GM]

wastegate actuator solenoid: 1997152

$22.48 CDN my cost

[mfewtrail]

I figured I'd add a few Fel-Pro gasket part #'s since I have the boxes kicking around from a few months ago...

Fel-Pro Permadry valve cover gasket set(these are the blue molded rubber gaskets) -VS 50085 R

Fel-Pro Intake Manifold Set(lower intake gasket, upper gaskets, throttle body gasket, dist. drive o-ring, and rtv sealant. This set has the paper style upper gaskets by the way.) - MS 96041 *NOTE* The o-ring in this kit appears to be made of rubber like the original ones(black in color), I use the GM silicone replacement o-rings instead(if that part # isn't here, I'll find it & post it).

Fel-Pro Upper Intake Set(in case someone only needs the upper portion, like when swapping out injectors or the like).  MS 93610

Fel-Pro EGR Gasket - 85216

Fel-Pro Perma Torque headgasket - 9471 PT