« previous next »
Pages: [1]

Author Topic: PMIII pressure switch  (Read 623 times)

0 Members and 1 Guest are viewing this topic.

Offline manifoldsrme

  • TGP Driver
  • *
  • Posts: 132
PMIII pressure switch
« on: May 15, 2010, 04:56:46 PM »
Can anyone post up a pic of the pressure switch on the pm3? Thanks in advance.
Logged
1990 TGP

Offline mfewtrail

  • Administrator
  • Boosted
  • *
  • Posts: 2066
    • TGP 1/4 mile times
Re: PMIII pressure switch
« Reply #1 on: May 15, 2010, 10:17:30 PM »
I don't have a pressure switch specific picture, but it's visible in this PMIII exploded diagram I have.

Logged
matt f. - '93 SE, '90 Black/tan TGP(#101 of 2,749), & '90 Red/tan TGP

http://photobucket.com/albums/y33/mfewtrail/
TGP 1/4 mile times
1990 TGP Coupe Vin Database

Offline manifoldsrme

  • TGP Driver
  • *
  • Posts: 132
Re: PMIII pressure switch
« Reply #2 on: May 16, 2010, 05:01:10 AM »
Thanks, what number is it on there? My brand new rebuilt pm3 motor won't shut off so I am hoping to use the old switch from my core. It is currently blowing the cap off the master. I am assuming too much pressure is being built up.
Logged
1990 TGP

Offline mfewtrail

  • Administrator
  • Boosted
  • *
  • Posts: 2066
    • TGP 1/4 mile times
Re: PMIII pressure switch
« Reply #3 on: May 17, 2010, 04:46:57 AM »
#26 on there. If you're looking directly at the PMIII unit, it's physically located just to the right of the accumulator. You'll probably have to lean down to see it as it's tucked under there when the unit is installed in the car.
Logged
matt f. - '93 SE, '90 Black/tan TGP(#101 of 2,749), & '90 Red/tan TGP

http://photobucket.com/albums/y33/mfewtrail/
TGP 1/4 mile times
1990 TGP Coupe Vin Database
Pages: [1]
« previous next »