TGPForums.com

  • November 23, 2017, 08:01:50 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search

Author Topic: Ratcheting shifter for 4T60-HD trans?  (Read 1118 times)

0 Members and 1 Guest are viewing this topic.

GHOSTOWLGRID

  • TGP Forums Beginner
  • **
  • Offline Offline
  • Posts: 17
Ratcheting shifter for 4T60-HD trans?
« on: January 29, 2016, 12:39:30 AM »

1990 Pontiac Grand Prix McLaren

3.1 Turbo v6
4T60-HD trans

Is there a ratcheting style shifter that is compatible with the 4T60-HD transmission and its factory shifter cable control?

I want to be able to bump up or down without risking moving more then desired.
this way I can move from 1-2 to 2-3 to 3-4 one notch at a time more easily.
And preferable same in reverse order.

The engine and transmission are done being worked on, I just need the ratcheting lever so the car is complete and ready for racing.
« Last Edit: January 29, 2016, 12:39:58 AM by GHOSTOWLGRID »
Logged

GPChief

  • Site Sponsor
  • Boosted
  • *
  • Offline Offline
  • Posts: 1231
Re: Ratcheting shifter for 4T60-HD trans?
« Reply #1 on: February 23, 2016, 11:49:06 AM »

You'll be the first, please keep us posted

Logged
2004 GTP -  3.8 Blown - Only modding for MPG.
1997 GTP  - 3.8 Blown - Too many mods to list.
1996 GTP - 3.4 DOHC - Twin to my 1997.
1995 SE - soon to be a 3.8 turbo car.
1990 TSTE x 2 white cloth
1990 TSTE x 1 maroon leather
1990 TGP - 5 speed.

killinprixs

  • Boosted
  • *
  • Offline Offline
  • Posts: 970
Re: Ratcheting shifter for 4T60-HD trans?
« Reply #2 on: February 24, 2016, 10:32:02 AM »

Keep the stock shifter... its easy to power shift with the automatic ,  if you are flat out and accidently bump from 1st to 3rd... you'll still be shifting into second gear and will have plently of time to correct and lock 2nd back down .... so theres not much of a point.   
Logged

Mach 5

  • TGP Driver
  • *
  • Offline Offline
  • Posts: 66
Re: Ratcheting shifter for 4T60-HD trans?
« Reply #3 on: February 29, 2016, 03:51:10 PM »

take the shifter assembly out and grind notches in to it. just wont be able to lockout but at least you will be able to feel what gear yer in...

-Jarek
Logged
 

Page created in 0.042 seconds with 18 queries.