Problems continue for me

Started by maddux31, February 12, 2004, 12:17:20 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

maddux31

I dropped a socket in when priming oil system.  Socket (small 5/16) went into hole for oil pump drive.  Will I be able to move this around with a magnet (moving it towards drain hole)?? the oil pressure eventually move it over towards the screen and end up just sitting there until I have the pan off next time?  Anybody have a photo or dig camera with an oil pan laying around??  I don't even know if it made it to the pan, I just put oil in the damn thing.  Help!!!!  Info????  TIA Dale.
reliving my youth searching for a TGP.

sleeperred90tgp

If it went into the oil pump drive hole and you can still put the oil pump drive into the oil pump forget it. It's already in the pan  :lol: and won't hurt anything unles you turn the car/motor upside down. :lol: Not a good practice.

I would also search thae area around the cam gear with a magnit to make sure it went down the hole.

Always worried about that, thats why I tape the socket on.

Jud
Quickest TGP on this planet.

:cheers:FASTEST TGP AWARD given By TGPforums!:cheers:

            Congratulations JUD! Keep an eye on your rear-view mirror for TGPilot

idbeast

To answer your quesion you will be OK it will drop into the oil pan and just
sit there, the oil pump can't pick it because of the pickup screen...   The socket is heavy enough the oil won't
throw it anywhere, plus the baffle will keep the oil from sloshing...
Sorry I couldn't do the flash, my step son borrowed my camera and didn't recharge the battery...
 
Oil pan:
www.turbograndprix.com/infopics/oilpan.JPG
Distributor hole:
www.turbograndprix.com/infopics/dishole.JPG
Distributor hole with bottom light:
www.turbograndprix.com/infopics/dishbl.JPG
Jim W     AKA  Idbeast
04 Supercharged Nissan Frontier Crew Cab 4X4 in sandstone (Light Gold)!!!
Red 89 TGP (14.95 1/4 mile) Not any more...... coming with surprises in the very near future, Black 90 TGP (14.41 1/4 mile), White 90 Turbo STE (15.06 1/4 mile), and now my 2nd White 90 Turbo STE 89 Dodge Shadow ES Turbo

maddux31

Quote from: sleeperred90tgpIf it went into the oil pump drive hole and you can still put the oil pump drive into the oil pump forget it. It's already in the pan  :lol: and won't hurt anything unles you turn the car/motor upside down. :lol: Not a good practice.

I would also search thae area around the cam gear with a magnit to make sure it went down the hole.

Always worried about that, thats why I tape the socket on.

Jud
Thanks Jud, I bought my TGP in Houston (Johnson Space Center/Seabrook area) from Dave Yeung.  Nasa guy, he took good care of the car too.
reliving my youth searching for a TGP.