P/S Pressure Line

Started by R Dubya, March 10, 2004, 08:42:41 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

R Dubya

I have a leaking pressure line, and I failed my state inspection because of it.  I have the GM PN# - 26025653.  Can anyone verify if this line is the same as I would find on any GP with p/s?  There is an STE at the yard that I think I will pull it from that instead of paying $90 new from GM Parts Direct.  Anyone?  Thanks.
Ryan Warren
'89 TGP
It doesn't run anymore.

turby

N/A GP's have the same line.

R Dubya

Sweet.  Im gonna take that one today then.  Looks like a beeiotch to get at.
Ryan Warren
'89 TGP
It doesn't run anymore.

sleeperred90tgp

You can get a new hose from like AZ for less than 25.00. :lol: For 25.00 i sure wouldn't put a used one on. :roll:  And yes its a bitch,  :twisted: you have to drop the rear of the sub frame. Don't forget the cinch bolt on the stering column u-joint.

Good luck
Jud
Quickest TGP on this planet.

:cheers:FASTEST TGP AWARD given By TGPforums!:cheers:

            Congratulations JUD! Keep an eye on your rear-view mirror for TGPilot

R Dubya

I could just tell it would be a pain in the ass.  I was planning on changing the lower mounts and subframe since the dealer wont do it.  I'll have to get myself one of those and do that also.  Thanks.
Ryan Warren
'89 TGP
It doesn't run anymore.