turn signal switch

Started by turby, September 14, 2002, 07:13:51 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

turby

September 14, 2002, 07:13:51 AM
Has anyone replaced their turn signal switch? How much did you pay for it?

Mr. Mod Man

#1
October 15, 2002, 06:23:38 AM
My whole steering column is a POS. The turn signals dont contact  well at all and now the wheel is locking while I am driving (Not completely , but catching) and doesnt lock at all when it should be( when the key is out). very depressing. part numbers needed for both probably.
TopGun160,x-pipe,TB coolant bypass, new stock injectors,coils,Taylor Spiro-pro 8mm,Iridium,Monster 2 gauge cable from alternator to charge post,new vacuum/boost lines
latest upgrades: ceramic brakes, Hyperground wires, Prior Reman. Powermaster III ABS
coming soon: pillar pod, alcohol injection, Blow-off valve

twinturbosedan

#2
October 15, 2002, 11:23:11 AM
are you sure you need to replace it?  i cleaned mine with Quik Dry electical contact cleaner and slightly bent the 6 copper tangs downward and mine works perfectly again :)
joshua

2000 Audi A6 Quattro - 2.7T/6-speed
1998 Buick Regal GS - L67/HM-4T65E

turby

#3
October 15, 2002, 12:37:11 PM
Mine has to be replaced now. The spot where the horn connects to it and goes through it burned up on mine.

sleeperred90tgp

#4
December 14, 2002, 08:27:41 AM
I got my switch at autozone for like $90.00 after repairing my switch about
three times.
Quickest TGP on this planet.

:cheers:FASTEST TGP AWARD given By TGPforums!:cheers:

            Congratulations JUD! Keep an eye on your rear-view mirror for TGPilot

Mr. Mod Man

#5
February 02, 2003, 04:33:29 PM
Be careful with that quik dry electric part cleaner. I tried cleaning my gold power dist. fuse holder and it disolved the lexan base like ice melting. Less than one minute it shattered into a million pieces. Try dielectric grease or deox-it .
TopGun160,x-pipe,TB coolant bypass, new stock injectors,coils,Taylor Spiro-pro 8mm,Iridium,Monster 2 gauge cable from alternator to charge post,new vacuum/boost lines
latest upgrades: ceramic brakes, Hyperground wires, Prior Reman. Powermaster III ABS
coming soon: pillar pod, alcohol injection, Blow-off valve

visusens

#6
February 02, 2003, 06:12:27 PM
Not that I am his P.R. rep or anything like that :) but Chris A has a complete  steering column with the wheel for sale on his web site. Give him a PM and see if he could help you guys out
Print
Go Up Pages1
User actions