Opinions on MSD 8.5mm Wires?

Started by TGP Nick, April 04, 2008, 10:56:01 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

cobracmdr

Quote from: TGP Nick on April 04, 2008, 05:28:34 PM
Meh I might just go with a new set of AC Delcos, they came factory on the car afterall, they can't be all that bad.  I can't afford a $123 set of wires at the moment.

Meh if you wires are fine wait and save your money, they are worth it.  Or get a cheep set of champion wires from rockauto for like 12 bucks to get you by.

1989 Turbo Grand Prix - missed very much!!!!
2010 Camaro 2SS/RS LS3 M6 12.01 @117 mph - Inferno Orange Metallic, long tubes, x pipe, Cat back, all 3" pipe 321 SS, vararam intake, LC-1, diy tune
01 Grand Prix GTP - 3.4 pulley, plog, k&n drop in, u-bend & resonator delete, tuned
03 Suzuki SV650N - zx10 shock, racetech springs/emulators, streetfighter

scott0999

#16
im sure theres alot of good wires out there but I just wanted to say I have a set of MSD 8.5s and like them alot. great fit at both ends and seem to have good specs. recommended!

I have taken the wires out many many times and they dont seem to screw up the ends like the stock ones can often
94 Cavalier Z24 3400 Turbo 5spd running $8F

cobracmdr

Cool i'll keep the msds in mind.  I know this the magnacores I have now were originally purchased by a friend for his 3.2 v6 which he ran with for probably 75k and now I'm running with them.  No problem with them pulling apart either and I pull mine out a lot, so did my friend probably everyday!

Ken

1989 Turbo Grand Prix - missed very much!!!!
2010 Camaro 2SS/RS LS3 M6 12.01 @117 mph - Inferno Orange Metallic, long tubes, x pipe, Cat back, all 3" pipe 321 SS, vararam intake, LC-1, diy tune
01 Grand Prix GTP - 3.4 pulley, plog, k&n drop in, u-bend & resonator delete, tuned
03 Suzuki SV650N - zx10 shock, racetech springs/emulators, streetfighter