HUGE TGP Part Out Updated (4-3-09)

[cobracmdr]

See Page 4 for updated parts!

[TGP Nick]

Would the 10 PSI wategate work on a stock T25?

[cobracmdr]

Would the 10 PSI wategate work on a stock T25?

yes I had to modify the actuator arm length to fit on my hybrid turbo which is the same length as a stock T25, the only thing you might have to do is drill a hole in the bracket it comes with for the stock actuator bolt spacing, that would be it.

Ken

[dogginred90]

 :icon_rolleyes: It's me again.  I was wondering what those injectors are out of.  So I can go buy a set. And if you would happen to change your mind I would rather buy them from you.

                                                      Thanks again

                                                              Alan :icon_biggrin:

[flybynite]

I sure hope Ken turbos the 3400, and after talking with him today I know he is thinking about it right now.....    :laugh:   On another note the injectors can be found on many ls1 equipped cars.. Just half to make sure it's the EV1 style connector found on many 97-01 Camaros, Firebirds and some Corvettes..  Here wtf these will work....    http://cgi.ebay.com/ebaymotors/FUEL-INJECTORS-28lb-Bosch-Design-III-corvette-ls1_W0QQcmdZViewItemQQcategoryZ33554QQihZ021QQitemZ310084441611QQrdZ1QQsspagenameZWDVW     I buy from these guys all the time and I'm always satisfied.. Good luck with your project..  later

[grinders_18]

I did read your list but I was confused when you listed a crossover with new bellows and a 2.8 crossover for the ends...is this crossover intact or is something wrong with it? Do you have a complete TGP crossover that doesn't leak for sale? If so, send me your Paypal and I'll send you the money ASAP.

[cobracmdr]

The first item is a "kit" that crossover does not leak, they one at the bottom is a bad crossver I was trying to sell with a 2.8 crossover to rebuild it with (the ball ends warp and leak) I guess I was not clear with that......sorry. 

Yes Adam I'm "thinking" about putting this stuff on the 3400 sometime next year.  I want to take my time and do everything right especially hogging out those manifolds for the D port.  Just as well since I'm not getting any action on these items.  Must be an omen or something ;)

Ken

[TheDoug]

Do you have a set of good tail lights? Not cracked, scratched, or faded?

[cobracmdr]

No sorry no tgp body parts......

[dhaggan]

if you still have the crossover and downpipe i'll take them

[cobracmdr]

Ok guys following are sold:

-fuel pressure gauge
-fuel rail
-downpipe (1 left now)
-crossover (There is one good one left, I sold the broken one)

I'm willing to separate some of the turbo kit items, let me know what you want.  The BOV, Magnacores, and a few other parts I will be keeping but the rest is still for sale.  Let me know what item you want and I'll work up a price.

Ken

[grinders_18]

Like I asked about before, I'll take the good crossover...what's the price?

[cobracmdr]

PM Sent Grinders

[killinprixs]

didnt you sell your tpg?

[grinders_18]

Yes I did, but I'm building a....spare?....motor in my free time. By building I mean this engine will be BUILT tough and right. And by spare.....well who knows what this engine will end up in  :icon_twisted: