Any certain steps before I undo my brake lines?

Started by slick94prix, February 08, 2009, 07:39:54 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

slick94prix

February 08, 2009, 07:39:54 AM
Got some SS brake lines along with the 11.25" upgrade I will be installing soon in the TGP, so I'm trying to get some info now. If this was any other car, I'd just undo the line, plug it, swap everything, and finish up. Add more fluid, and bleed like crazy. However, these cars are not just any other system out there.

So, what process do I need to follow to do this right, without messing up the PMIII?

Thanks,

Chris
Chris
- 1996 Pontiac Firebird, LT1 T56, 88k miles. Chameleon Blue Green on charcoal cloth. A base bird with a v8 and a manual trans.

- 2000 Bonneville SE: Silver on Charcoal Leather, pretty much every option on an SE. Current situation- Lots of miles and adding more daily

mfewtrail

#1
February 08, 2009, 11:37:05 AM
The normal procedure applies here, just bleed the PMIII like Chris A. has outlined here.

http://www.kazmotorsports.com/tpsgarage/
'93 SE, '90 Black/tan TGP, & '90 Red/tan TGP

slick94prix

#2
February 08, 2009, 01:22:02 PM
So I can remove the lines as normal, don't have to worry about anything then?

Thanks!
Chris
- 1996 Pontiac Firebird, LT1 T56, 88k miles. Chameleon Blue Green on charcoal cloth. A base bird with a v8 and a manual trans.

- 2000 Bonneville SE: Silver on Charcoal Leather, pretty much every option on an SE. Current situation- Lots of miles and adding more daily

mfewtrail

#3
February 08, 2009, 01:27:35 PM
Quote from: slick94prix on February 08, 2009, 01:22:02 PM
So I can remove the lines as normal, don't have to worry about anything then?

Thanks!

Yep, just remove the old lines, install your new ones, then bleed.
'93 SE, '90 Black/tan TGP, & '90 Red/tan TGP
Print
Go Up Pages1
User actions