High Idle and WOT Problems

Started by letsjam, February 15, 2010, 09:11:46 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2
User actions

TGed

#15
April 04, 2010, 09:41:39 PM
Vacuum leak.  Check for gasket improperly positioned and check for wires pinched in between the uim/lim.  Check for a cracked plenum, it can happen when the gasket is or has once been installed incorrectly and the plenum bolts torqued down.  It creates a pivoting/rocking point which the cast will not allow for, resulting in a junk plenum.
http://www.tgpforums.com/index.php/topic,5214.msg38936.html#new

-Don't go around saying the world owes you a living; the world owes you nothing; it was here first.-

-Assume nothing, question everything.-
Print
Go Up Pages 1 2
User actions