Text only | Text with Images

TGPForums.com

MODIFICATIONS => Exterior/Interior/Lighting => Topic started by: 90TGP on July 08, 2003, 09:27:55 PM

Title: How to remove drivers A-Pillar???
Post by: 90TGP on July 08, 2003, 09:27:55 PM
How do you remove the drivers side interior A-Pillar?
Title: How to remove drivers A-Pillar???
Post by: Chris A on July 08, 2003, 10:43:49 PM
Carfully pry it off. Its only held in with clips.
Title: How to remove drivers A-Pillar???
Post by: tyroelite on July 09, 2003, 10:04:41 AM
Quote from: Chris ACarfully pry it off. Its only held in with clips.

Make sure that is CAREFULLY  On these older cars, those clips tend to break pretty easily. The person who owned my car before me removed it at some point and snapped a few off then hot glued the piece back in place. Imagine my surprise when I tried to pry it off and found it wouldn't go back on!
Title: How to remove drivers A-Pillar???
Post by: no1kicker on July 09, 2003, 11:46:33 AM
there are also two small 7mm? bolts next to the dash.
Title: How to remove drivers A-Pillar???
Post by: tyroelite on July 09, 2003, 12:30:36 PM
Quote from: no1kickerthere are also two small 7mm? bolts next to the dash.

I didn't see any bolts on mine...Maybe the last person just never put the bolts back in
Title: How to remove drivers A-Pillar???
Post by: LukeZ34 on July 09, 2003, 12:31:00 PM
I don't remember any bolts, but one of the clips broke on mine the other day. Had the same problem with those clips breaking in my cutlass.  :evil:
Title: How to remove drivers A-Pillar???
Post by: Chris A on July 09, 2003, 05:44:25 PM
There should be no screws on it. Someone may have used screws at some point to help it stay put.
Text only | Text with Images