Print Page - A/F Ratio gauge install help

Title: A/F Ratio gauge install help
Post by: 90TGP on July 15, 2003, 09:56:09 AM

I know a few of you installed a/f gauges. I was wondering on how you hooked up the wire that splices into the 02 sensor. I need help.

Thanks

Title: A/F Ratio gauge install help
Post by: maximage on July 15, 2003, 09:58:20 AM

Just cut and splice(don't forget to solder) or use a crimp on splicer. I prefer the cut and splice method

Title: A/F Ratio gauge install help
Post by: TurboGTU on July 17, 2003, 01:22:36 AM

I've heard of people using two O2 sensors. The oe is left alone,and a new one is placed elsewhere for the A/F meter. Soposidly to keep an acurate reading for both the ecm and the meter, So they won't fight for the signal.

Title: A/F Ratio gauge install help
Post by: TGPilot on July 17, 2003, 07:31:49 AM

Quote from: TurboGTUI've heard of people using two O2 sensors. The oe is left alone,and a new one is placed elsewhere for the A/F meter. Soposidly to keep an acurate reading for both the ecm and the meter, So they won't fight for the signal.

Sounds like a good idea!

For some reason I always thought that the A/F ratio meter required a Wideband O2 sensor... 8)

Title: A/F Ratio gauge install help
Post by: 90TGP on July 19, 2003, 08:11:25 AM

Widebands are usually used when you dyno-tune a car.

TGPForums.com

GENERAL => How do I? => Topic started by: 90TGP on July 15, 2003, 09:56:09 AM