TGPForums.com

GENERAL => General => Topic started by: TGPrix. on September 30, 2003, 05:45:03 PM

Title: GroundEffects for 90TGP...
Post by: TGPrix. on September 30, 2003, 05:45:03 PM
Iz there a body-kit for a 1990 TGP that replaces tha stock one...
or would you have to get one, or have yourz custom made...
Title: GroundEffects for 90TGP...
Post by: tyroelite on September 30, 2003, 05:56:38 PM
There used to be one from Razzi and one from Eurbini but the Eurbini site doesn't have the kit for the GP's listed anymore. The razzi kit is ugly in my opinion. I'd stick with the stock kit. Looks much better than the Razzi's.
Title: GroundEffects for 90TGP...
Post by: TGPrix. on September 30, 2003, 05:58:42 PM
do you have a link to Razzi's kit so I could check it out...
Title: GroundEffects for 90TGP...
Post by: tyroelite on September 30, 2003, 06:00:27 PM
http://www.razzi.com/vehicles/pontiac/grand_prix_8890_2dr_1007.html

Also, look at the page on w-body.com in the upgrades section. There is a whole page on kits there.
Title: GroundEffects for 90TGP...
Post by: TGPrix. on September 30, 2003, 06:02:33 PM
your right itz UGLY...
thanx for you help...
Title: GroundEffects for 90TGP...
Post by: tyroelite on September 30, 2003, 06:05:39 PM
The eurbini kit looked much better. I was gonna get it for my 90 SE N/A but i couldn't find it anywhere.  

Here is the link to the wbody site
http://www.w-body.com/upgrades/body-grandprix1.html
Title: GroundEffects for 90TGP...
Post by: TGPrix. on September 30, 2003, 06:08:06 PM
Cool thanx...
by tha way...
iz there a way to change a 90's front end to lets say a 96's front end...
I've alwayz like'd thoze better for some reason...
make it look more sporty from tha front...
and they got fog lights...
Title: GroundEffects for 90TGP...
Post by: tyroelite on September 30, 2003, 06:10:31 PM
if you've got enough money, you could do anything...
Title: GroundEffects for 90TGP...
Post by: TGPrix. on September 30, 2003, 06:15:17 PM
Oh...
well it looks like that ain't gonna' happen then:lol:...
Title: GroundEffects for 90TGP...
Post by: Chris A on September 30, 2003, 11:09:15 PM
Thats a dime a dozen question.

1st Q:  Changing the ground effects is quite involved. First you will have to remove the front and rear bumpers and replace them with non TGP ones for any aftermarket kit to work. Most of the fender flares and body side moldings have rivited on brackets to hold them tight to the car. These will have to be drilled  out and removed.

As far as a 94 and UP B4U package (the Aero effects you are talking about) you will have to change the front and rear bumpers, front wiring, front header panel, front lights wheel moldings, side moldings.

Many have talked about it, 1  may have done it. The newer effects pacakge has 3 ribs vs the TGPs 5, so it would all have to be changed. IMO the effects on the TGP are one of the things that make the car. It can be found on no other car GM made, where as the newer B4U package was eventually included on all GP's whether they were a GTP or just an SE with a 3.1.