Print Page - Vacuum line routing

Title: Vacuum line routing
Post by: Goodo on October 05, 2003, 07:37:04 PM

hey guys this is my first time posting but any help would be greatily appreciated.

Does any one have a Diagram of how the vacuum lines run on the 3.1T?

Specifically what I'm looking for are where the lines go between the

throttle body, Purge Cylinder, FPR, EGR and Map sensor.

the routing, where they " T " and that sort of thing.

thanks again

Jason

Title: Vacuum line routing
Post by: Chris A on October 05, 2003, 09:11:57 PM

no, but you should!

The vacuum lines for those things are on the black label at the front of the car on the radiator support

Title: Vacuum line routing
Post by: Goodo on October 05, 2003, 10:02:20 PM

unfortunatly I don't have that any more.

it would have made life much more easy if I had

Title: Vacuum line routing
Post by: Dotcutnup on October 06, 2003, 08:16:57 PM

ill try to gat a copy of it to you by email or post it here tomorrow.

Title: Vacuum line routing
Post by: Goodo on October 07, 2003, 02:58:05 PM

thanks again :)

Title: Vacuum line routing
Post by: Dotcutnup on October 08, 2003, 06:53:26 PM

ok I have the diagram but no way to scan it, hmmmm any suggestions?

Title: Vacuum line routing
Post by: mfewtrail on October 08, 2003, 08:17:01 PM

I'll see if I can get a picture of the diagram for you tomorrow if I get a chance to 8)

Title: Vacuum line routing
Post by: Goodo on October 10, 2003, 10:19:05 AM

even just a simple MS paint file would be fine.

just to show what goes where and all that good stuff.. :D

Title: Vacuum line routing
Post by: mfewtrail on October 10, 2003, 10:53:07 AM

you've got mail!!!!! hopefully you can read the writing on the pictures, if you need to know what a word is..just ask and I'll let ya' know 8)

TGPForums.com

GENERAL => General => Topic started by: Goodo on October 05, 2003, 07:37:04 PM