Print Page - what size socket...

Title: what size socket...
Post by: GPChief on October 15, 2003, 08:51:52 PM

what size socket / key to get out rear vacume port? The one on the rear top of the upper intake manifold, directly above MAP sensor? My 1/4 in ratchet is too small, an 3/8 in ratchet is too big... I want to route my BOV & boost gage to this port.

Thanks

Title: what size socket...
Post by: Chris A on October 16, 2003, 05:45:31 AM

11/32 IIRC, originally I just used a 3/8 extension slightly ground down.

Title: what size socket...
Post by: GPChief on October 16, 2003, 09:44:09 AM

Thats tool abuse :shock:

I think I'll borrow an 3/8th..... :wink:

Title: what size socket...
Post by: idbeast on October 16, 2003, 09:08:02 PM

It's a 5/16 square. :shock: :drinking:

Title: what size socket...
Post by: Chris A on October 16, 2003, 09:27:20 PM

I guess the hole was wallered out a little.

Tool abuse, eh I guess. Better than stripping out the plug!

TGPForums.com

MODIFICATIONS => Performance => Topic started by: GPChief on October 15, 2003, 08:51:52 PM