Print Page - PICTURES!!!! Polished and HPC T-25 Turbo

Title: PICTURES!!!! Polished and HPC T-25 Turbo
Post by: Invasion1 on July 15, 2004, 11:36:22 AM

Full Rebuild
Polished Compressor
HPC Turbine

all from www.cheapturbo.com contact Ken....... :D

its not really cleaned up yet.....im going to polish/clean the compressor a bit more......before install.......

Compressor pic

(http://ca.msnusers.com/_Secure/0UACwG5sYaPM08vYxW8BpMrTibc2wbPnMsI5YBVPJ46k1PgcGvWAYNkDXXnZvAnkHitIyzld0IOuSDMuBBoEMTijAtaiHLmFon9FCSD87*I9AoJNYa9LQ*ukDAABmAAIA/Turbo%20Compressor.JPG?dc=4675480703579387071)

(http://ca.msnusers.com/_Secure/0UQCYGM0YpQY08vYxW8BpMrTibc2wbPnMgudoydZX0A20K!*eIRDfwGpXvN*b0xngZn!Uv5jJnHt81jvfFWd5orqhqIuQFH2wYFd78d4vK6EKXR3*xc*TcrOWJ0J4PYQK/Turbo%20Compressor2.JPG?dc=4675480703602727832)

(http://ca.msnusers.com/_Secure/0TAB8HrsWNmg08vYxW8BpMjumOt!hd3boIgQZxkXvXO6kPdo9*3BQSmVgaPPn04IFhvUTp38*K9tZkp6U8QykF0FGto2t0K4QBzTvI68dSs1lL6Rp6J8tMw/Turbo%20Flange.JPG?dc=4675480703622909406)

(http://ca.msnusers.com/_Secure/0SwCz*yQWZD808vYxW8BpMjVmI2g1lonvqRiGxMVGPV33WSYAz6xKyCoGbTK7H!K3mO97E!JwvO2HDH6Smb4PljlG7tcElNMk6aDbPilpjHJvfTbcjKbMNw/Turbo%20Side1.JPG?dc=4675480703649924751)

Turbine Pic

(http://ca.msnusers.com/_Secure/0TQAAAEcXpI808vYxW8BpMrkM3GUtNhoQEK7bUUGKhNfeUAWunN7gOhMBbw0guKpCa85uCN3ZSI2I3mFwkRQMC3RathIm1o1XLAL*kJx2RgjYQqUEtGqlyw/Turbo%20Turbine.JPG?dc=4675480703671277101)

Enjoy

I AM.............. :wink:

Title: PICTURES!!!! Polished and HPC T-25 Turbo
Post by: LukeZ34 on July 15, 2004, 01:07:32 PM

Damn, that looks pretty good.. I think I may have mine look like that when I get it rebuilt.

Title: PICTURES!!!! Polished and HPC T-25 Turbo
Post by: dbtk2 on July 15, 2004, 01:45:38 PM

How much did that run you?

Also, is it supposed to be more efficient with the HPC turbine or what? Basically, would it make any difference performance wise?

Shawn

Title: PICTURES!!!! Polished and HPC T-25 Turbo
Post by: Invasion1 on July 15, 2004, 02:23:50 PM

Full rebuild and the polished compressor and HPC turbine ran me $400 Even....... with shipping....(got it in 4 days)

I got the HPC coating due to the cracks in the turbine housing.....around the W/G port......

the HPC coating will hopefully stop the cracks from getting longer and possable seal them up a bit better.......

and that shit won't burn off!!!!! for an additional $60 its beter than a $15 dollar can of heat paint.....as far a apperance goes.....

i dunno of any performance benefits......just apperance mostly and if it helps prevent cracking or helps seal them...........that helps

i might add the Polished compressor and HPC turbine

are both only $60 Dollar options when you have the rebulid done.....

cheers
Dave

Title: PICTURES!!!! Polished and HPC T-25 Turbo
Post by: mfewtrail on July 15, 2004, 08:43:30 PM

Looks nice, now get that Cutty together and get some videos of it. :wink:

Title: PICTURES!!!! Polished and HPC T-25 Turbo
Post by: Gearhead43 on July 17, 2004, 08:41:27 PM

dammmmmmed.... I need one for my Show car!!!

:shock: :shock:

Title: PICTURES!!!! Polished and HPC T-25 Turbo
Post by: mfewtrail on July 17, 2004, 08:44:04 PM

Quote from: Gearhead43dammmmmmed.... I need one for my Show car!!!

:shock: :shock:

Just spend a couple of hours hard labor sanding/polishing your turbo Dave. :wink: I just had to do this on a 63 GMC w/aluminum wheels(they looked horrible, so I repolished them).

Title: PICTURES!!!! Polished and HPC T-25 Turbo
Post by: GPChief on July 26, 2004, 04:10:59 AM

What e-mail did you use to contact them? they have not responded to the one I sent their customer service last week.

Title: PICTURES!!!! Polished and HPC T-25 Turbo
Post by: Invasion1 on July 26, 2004, 01:45:42 PM

i called....................i could never get through to the email ether.....

use the toll free #

not sure it will work internationaly

TGPForums.com

MODIFICATIONS => Performance => Topic started by: Invasion1 on July 15, 2004, 11:36:22 AM