AC Delco/Stock OEM:
Ignition Control Module (ICM) - D1998A
Ignition Coils - D555
Spark Plugs - R42LTS
Spark Plug Wires - 12073938
PCV Valve - 25043843
Throttle Position Sensor (TPS) - 17106680
Knock Sensor - 10456208
Crank Position Sensor (CPS) - 10456555
Oxygen Sensor (O2) - AFS22
Oil Filter - PF47 (shorter filter); PF52 (longer filter)
Fuel Filter - 25055052
Fuel Pump - EP375
Fuel Pressure Regulator (FPR) - 17112481
Performance/Upgrades:
K&N Open Filter - RU-1390; RU-1770
MSD Ignition Coils - 8224
NGK V-Spec TR5 Spark Plugs - 2238
NGK Iridium TR5IX Spark Plugs - 7397
MSD Spark Plug Wires (8mm Helicore) - 3181
Magnecore KV-85 Spark Plug Wires (8.5mm) - 6540
KYB GR2 Front Sturts - 366004
KYB GR2 Rear Struts - 236003
GMPP Rear Trailing Arms - 12498649
Prior Reman ABS Accumulator - 4900100
ABS/Powermaster III Rebuild sources:
It has been said that Prior Reman. no longer remanufactures our integrated PMIII master cylinders. They recommended a place called SIA electronics to the last person that contacted them. I'm not sure if they still carry the accumulators or not, but I will call or email them to find out and then update this post.
1. http://www.invasionauto.com/page.php?p=part&part=ABS-GM4600107&PHPSESSID=820345334c3e1f07063ed4014be5cd44 Price: $695.00
2. http://www.siaelec.com/ Price: around $800 Contact them for an accurate quote.
Pontiac Grand Prix Parts catalog scans(tons of part #'s!): http://s44.photobucket.com/albums/f14/platjblser/Grand%20Prix%20Parts%20Catalog%20scans/
Ok, then here's my initial contribution:
Ignition Control Module (ICM) - D1998A
Ignition Coils - D555
ign wires 706R AC delco
O2 12014 bosch
oil filt PF42 AC delco
Quote from: no1kicker
oil filt PF42 AC delco
Actually, its PF52. My STE Turbo supplement manual also lists it as a PF47, but thats just the PF52, but shorter.
Shawn
I found HIM. Jeorgie!.. http://www.geocities.com/ste_turbo/partnumbers.html
Or thats not what your looking for?
Figured I'd add these(part #'s listed are dealer/GM numbers) I looked them up to get the "dealer list price" for each part as well(the prices I'm including are what you would pay at the actual dealership, not through GMpartsdirect. The prices will vary a slight bit from dealer to dealer in case you're wondering, so call locally for exact prices.).
AC Delco Plug wire set - 12073938 $49.60
PCV Valve - 25043843 $5.97
Fuel Filter - 25055052 $16.52
Oxygen Sensor - 25162753 $58.50
I have some more somewhere that I'll include when I find them......
Since I'm thinking about it due to the post on the W-body board...
TGP Fuel pump = AC Delco EP375
Available at autozone for $69.99 currently w/ a 1yr warranty.
GM Performance Parts Rear Trailing Arms Part # 12498649
$32.37 from gmpartsdirect(expect to pay $10 more at your local dealer).
Maybe one of the mods can prune out the other posts when you transfer the part #'s to the original post?
GM strut tower brace (req drilling) 12456148
GM TB bypass hose 10115742
Quote from: no1kickerThey work on our gen? I know ZZP makes the brackets for the 97+, didn't know they would fit our cars.
Yep, ZZP carries some for us, I think they list them on their website now.
Here's Matt's write-up on them/the STB.
http://www.wbodysource.com/modules.php?op=modload&name=News&file=article&sid=27&mode=thread&order=0&thold=0
Under Hood Insulator
GM PN# 10284793
My Part numbers page has been updated too with Pictures the origanal link still works but heres a new link
//www.geocities.com/grandprix_ste
The GM # for the coils is 10472401 (delco D555).
ABS Accumulator from Prior Reman. part # 4900100 , currently $99.95.
ATP Trans Vacuum Modulator For the TGP, Different from the N/a ones strangly
JX-69
Quote from: 'Shawn Lin'Radiator, there is no cross reference for this part, but finding one may be easier with this information (courtesy Jeff M.):
Manufacture, Blackstone out of Canada, sub-contracted to ASC for the TGP setup.
ASC part number: V29X858230XXX
Blackstone part number 1002609
Other Blackstone (?) number 90031601
Core dimensions:
21 1/4 ? width
15 1/4" height
2 1/4" thickness
37 rows
9 fins per inch
3 core (NA GP has single core)
3.4 DOHC windage tray (bolt in with DOHC main studs) - GM 24503912 (GMPD $8.34, tray only)
GM 3 wire heated O2 sensor - GM 25172680 (GMPD $36.39)
Cam Bearings: Federal Mogul 1492M
Rod Bearings: Federal Mogul 4020A
Main Bearings: Federal Mogul 7242MA
Goodridge SS brake lines, '88-'90 W - GS12264 (use for '94+ swap on TGPs as well)
http://www.hrpworld.com - $99.95
Felpro exhaust manifold gaskets - MS93692
Felpro lower engine gasket set - KS2654
Energy Suspension greasable sway bar bushings (when using 34mm front sway bar) - 9.5160G and 9.5167G (http://www.energysuspensionparts.com - $34.97 shipped total)
Oil pump: Melling M95HV (Summit - MEL-M95HV $59.95) - pump drive rod included, pickup not included
Solid rubber lower motor mount - NAPA BK 6121645 (http://www.napaonline.com - $49.88)
Quote from: GutlessSupreme on March 13, 2006, 08:59:22 PMGoodridge SS brake lines, '88-'90 W - GS12264
'94-'97 W - GS12237
(no listing for '91-'93, I figured I'd post the '94+ number for those with the rear brake upgrade)
http://www.hrpworld.com - both $99.95
the '94+ hoses actually won't work on a TGP with '94+ brakes (they are way too short). you'd still need the '88-'90 style Goodrich hoses for a TGP with '94+ rear brakes.
dont you have to have PMIII specific lines for the rear? Since its one line then splits off, beeing its a 3 channel system?
Quote from: Prospeeder on March 13, 2006, 10:27:49 PM
dont you have to have PMIII specific lines for the rear? Since its one line then splits off, beeing its a 3 channel system?
There Brake Hoses not lines, all the hoses are the same even for PMIII TGP's
Quote from: TurboSedan on March 13, 2006, 10:18:13 PM
Quote from: GutlessSupreme on March 13, 2006, 08:59:22 PMGoodridge SS brake lines, '88-'90 W - GS12264
'94-'97 W - GS12237
(no listing for '91-'93, I figured I'd post the '94+ number for those with the rear brake upgrade)
http://www.hrpworld.com - both $99.95
the '94+ hoses actually won't work on a TGP with '94+ brakes (they are way too short). you'd still need the '88-'93 style Goodrich hoses for a TGP with '94+ rear brakes.
edited to avoid confusion then. thanks Josh.
Does anyone have the part number for the Rear brake distribution valve?
The number on Chris' site *18015258* doesn't show up on GMPartsDirect. I put it into PartsAmerica's page they showed it and we ordered it but they can't get it either? ACDelco doesn't even show the number on their site either? :icon_confused:
I finally got around to scanning a small 88-96 "Grand Prix Coupe" parts catalog I have. It has a lot of things that apply to pretty much any W-body from subframe bolts to other misc. items. :icon_mrgreen:
17 pages total
http://s44.photobucket.com/albums/f14/platjblser/
Thanks Matt
You're welcome. ;) :icon_mrgreen: I may start scanning various things of importance from the factory service manual(s) soon(thinking about starting with wiring diagrams).
Two way check valve @ vacuum modulator or for HVAC - "HELP! Part # 47150" Search the board for the vaccum diagram to see the proper way to install it. ;)
OEM sunroof gasket - GM # 12392898
Quote from: R Dubya on September 09, 2006, 01:59:20 PM
OEM sunroof gasket - GM # 12392898
awesome I need one of those
part number for the Rear Proportioning Valve is 88927272
thanks to Luke :icon_cool:
wastegate actuator solenoid: 1997152
$22.48 CDN my cost
I figured I'd add a few Fel-Pro gasket part #'s since I have the boxes kicking around from a few months ago...
Fel-Pro Permadry valve cover gasket set(these are the blue molded rubber gaskets) -VS 50085 R
Fel-Pro Intake Manifold Set(lower intake gasket, upper gaskets, throttle body gasket, dist. drive o-ring, and rtv sealant. This set has the paper style upper gaskets by the way.) - MS 96041 *NOTE* The o-ring in this kit appears to be made of rubber like the original ones(black in color), I use the GM silicone replacement o-rings instead(if that part # isn't here, I'll find it & post it).
Fel-Pro Upper Intake Set(in case someone only needs the upper portion, like when swapping out injectors or the like). MS 93610
Fel-Pro EGR Gasket - 85216
Fel-Pro Perma Torque headgasket - 9471 PT
Fuel lines that run over top of fuel tank:
10062887 PIPE ASM FUEL RTN
10062888 PIPE ASM FUEL FEED
(http://www.nconnect.net/~tookycat/tgp/new_fuel_lines.jpg)
Here they are installed:
(http://www.nconnect.net/~tookycat/tgp/fuel_tank_new_lines.jpg)
See fuel line repair article: http://www.tgpforums.com/index.php?topic=4163.0
you should paint your tank with POR 15 while its down
(http://i29.photobucket.com/albums/c264/mshantz83/TGP%20May%2015/TGPTAgastank.jpg)
Front hub bolts (hub to knuckle, not wheel studs):
10104548
GM list $4.25/ea.
size: 10x15x43.2
Added some PMIII rebuild sources to the first post in this thread for future reference. ;)