ok i searched and as usual found nothing useful (i hate search)\
well i have a 94 lumina euro 3.1, i was thinking of taking the minfolds, x-over, turbo, downpie off of a TGP and putting it on the lumi.
my question is what parts do i need exactly, will my stock pcm work or do i need the TGP one, if there any wireing im gonna need to do, and is it just better to swap the whole engine out of the TGP
i know enough about engines to do this myself, but just need some advice, tips, ect.
what you will need from a parts car for a direct bolt up:
turbo
exhaust manifolds
crossover
radiator with hat & both electric fans
intercooler
computer
plenum
downpipe
oil/coolant supply & return hoses
2-bar MAP
upper & lower intercooler pipes
fuel pump
injectors
oil pump
oil pan
boost control solenoid & lines
fuel lines
wiring harness
throttle body vacumm lines
http://www.w-body.com/forum/viewtopic.php?t=22683&highlight=
Once you do the swap, you'll still have problems with the tranny not being strong enough. If I were gonna do it myself, I would do exactly what was done to my Lumina. Take a complete Turbo 3.1 engine and TGP tranny and bolt them in in place of the Vin T 3.1/stock tranny.
Just my opinion though.
Shawn