how do you get a cranksensor out that the top broke off of
You can play around on the outside with a needle nose
pliers or (2) try drilling and screwing in a self tapping screw.
The last resort is removing the oil pan...
I know someone that sprayed the hole out with brake cleaner real good and used JB Weld or something like it to attach a bolt to the broken piece. After some careful wiggling it came right out.
I had that happen once I just pushed the broken part all the way back untill hit hit the crank then I used a sheetrock screw by hand and lightly screwed it to grip it on the edge just enough to get a grip and slide it out. it took 2 trys but came right out.
hit it with a propane torch first then use an extraction drill bit
thanks for the info the propane worked
Right on man! Good to hear. 8) I knew this because my other car is a Ford :o :lol: :lol:
Quote from: chin143QuoteRight on man! Good to hear.
Thats one way but i am not sure if it will work with every option.
Whoa, I think you are lost , BUDDY!