Print Page - a few set up pics um 56k um no

Title: a few set up pics um 56k um no
Post by: mclaren18psi on December 31, 2005, 03:25:12 PM

i know there rought looking but i think after im finished it will be nice and produce the power im lookign to make
andy
(http://pic16.picturetrail.com/VOL669/4270021/8968663/123712252.jpg)
(http://pic16.picturetrail.com/VOL669/4270021/8968663/123712227.jpg)
(http://pic16.picturetrail.com/VOL669/4270021/8968663/123712177.jpg)
(http://pic16.picturetrail.com/VOL669/4270021/8968663/123712098.jpg)
(http://pic16.picturetrail.com/VOL669/4270021/8968663/123711982.jpg)
(http://pic16.picturetrail.com/VOL669/4270021/8968663/123712048.jpg)
this is the new turbo it was bought new and taken apart we put a new center section in it its upgraded to ball bearing and has a clip on the wheel the ar is now 63/80 i have the original 60/50 section its getting put in the turbo you see being used in all the mock up
andy

Title: a few set up pics um 56k um no
Post by: futuretgp'er on January 03, 2006, 06:43:13 PM

whats the pipe coming from the crossover meant for.....wastegate recirulation or something??

Title: a few set up pics um 56k um no
Post by: dbtk2 on January 03, 2006, 08:54:01 PM

Quote from: futuretgp'erwhats the pipe coming from the crossover meant for.....wastegate recirulation or something??

external wastegate....notice no wastegate on the turbo itself.

Shawn

Title: a few set up pics um 56k um no
Post by: futuretgp'er on January 04, 2006, 12:23:39 PM

oh i see cause theres nowhere to put a divorced in front of the turbo so you had to "remote mount it" never mind i was just being a dumb.....so your venting it back into the dp is that what im seeing??

Title: a few set up pics um 56k um no
Post by: GangstGP on January 04, 2006, 12:37:44 PM

it looks like their taking another route. says its got an electric cut out. dont know if that is what I am seeing there, but thatd be keewl. no that is the waste gate wasting right there?

Title: dp
Post by: mclaren18psi on January 06, 2006, 06:57:23 PM

the waste gate actualy exits through the space the horns were there now mountedunder the battery tray it will come out under the car, in the fender or out the side of the fender i cant deside the dp has changed its now 2.75 inch steped to 3inch where it turns to drop down and go under the car it hits a split there with the cut out and its getting a resinator then a 3inch catback to the old dtm mufflers i had or im going to put the old tips on with spintec mufflers but for now till it gets tuned is going to have a pipe with the wb o2 tacked on just till dyno work can start

TGPForums.com

MODIFICATIONS => Performance => Topic started by: mclaren18psi on December 31, 2005, 03:25:12 PM