i bought a 92 gp from a local salvage yard for 300, it has a 5spd 3.1v6. Now i have been told that the tranny was a hm-284, i don't know how you can tell the difference between the 284 and 282, also if anybody wants any free stuff just come on down and strip it, everything has to go anyways for the track, the motor is being replaced with a 3.4dohc, any suggestions or comments are appreciated.
Quote from: fwdjarvis3i bought a 92 gp from a local salvage yard for 300, it has a 5spd 3.1v6. Now i have been told that the tranny was a hm-284, i don't know how you can tell the difference between the 284 and 282, also if anybody wants any free stuff just come on down and strip it, everything has to go anyways for the track, the motor is being replaced with a 3.4dohc, any suggestions or comments are appreciated.
well if is a '92, than it would have to be a 284....which would also mean it would have a 3.4 DOHC. there is no such thing as a '92 Grand Prix with a 3.1/5-speed. maybe some previous owner swapped some stuff out?
as far as the V6/5-speed Grand Prix goes:
'88-'89 - 2.8/282
'89-'90 - 3.1/282
'91-'93 - 3.4 DOHC/284
i was told the same thing, but all the emission stickers say exactly what is under the hood.
only way to tell for sure what it had from the factory is by looking at the "Service Parts Identification" sticker. it should be on the spare tire cover in the trunk.
MG2 - 282 5-speed
ME9 - 4T60 automatic
LH0 - 3.1 (8th digit of VIN 'T')
LQ1 - 3.4 DOHC (8th digit of VIN 'X')
what is the difference between the two trannys?
the gear ratios in the 284 are exactly the same .......they are setup to fit the dohc motors tq and hp specs. and it also uses a pull type slave cylinder which is more expensive to buy
282 are gear matched for the 3.1 and use a push type slave cylinder
also clutches for the 282 are about half what a 284 clutch costs