I had it now I need it again because I may have found some in mint condition But I want the Right part number. let me know thanks
Justin
you just need a remote that is made by TRW and has the 'unlock' & 'lock' on the top row, and trunk on the bottom. i have a remote from a '95 Monte and it works. it has a different part# but the only difference is the Monte remote has a bowtie emblem and my original remotes have the Olds rocket symbol. if you can i would try to program the remote and see if it works.
how do you reprogram a remote? Thanks,
Ground out your connector in the trunk. After everything is done cycling press any one button on the transmitter once. Everything should cycle again. Take the ground wire off and your done.
cool thanks
so I need to keep it Gounded when I Press the Button?? after it cycles??
also does the remote Change frequency or the Receiver??
I now have 2 Remotes but they have Different Part numbers.
They look the same. except one is Smooth and the other is Texured. also they are Rounded.
A: P/N 12522339
B: P/N 10205241
If they need the Part number anyone have a
12522339 sitting around I'll Trade you my 10205241 for it.
A:(http://ebay0.ipixmedia.com/abc/M28/_EBAY_d1012b166fcef3b65fc592e4e0d26e63/i-1.JPG)
B:(http://ebay2.ipixmedia.com/abc/M28/_EBAY_46b62b3d9698faa982c8469d7375c249/i-1.JPG)
Both of those will work for you. Want to sell one?
Yes you keep the connector grounded through the whole process I posted before. After you press the button the locks will cycle again. Then pull the ground wire off.
I was looking at the remote I got with my Cutlass and it's #10205240. Compare that to your part #'s Jeorge. Only one number off of one of yours.
Quote from: redturbo90Both of those will work for you. Want to sell one?
I was looking at the remote I got with my Cutlass and it's #10205240. Compare that to your part #'s Jeorge. Only one number off of one of yours.
and thats the one I want to Trade or Sell for the other one I want to Keep.
also I may need batts for these and I found a sweet Deal on ebay but I dont have a Credit card and thats all they will take...Grrr.....
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1382643984&rd=1
these are what I have in both of the Remotes.
but that still doesnt answare if I could use Both because of the P/N being Different. anyone know?? I want 2 Remotes not Just one.
I don't see why you can't use both. Program one, unhook the ground.... Ground the connector again and program the other.
Yeah I'll have to try that in the morning when I get home.
i think i got the wrong remote, i have the three buttons but the trunk releas and the unlock buttons are switched around. I tried programming it using the method described above but it didn't work. Should it?
Quote from: redturbo90I don't see why you can't use both. Program one, unhook the ground.... Ground the connector again and program the other.
That won't work. You can program up to two remotes. After pressing the button to program the first, press a button on the second one to program it, then unground the connector. The unlock and lock buttons MUST be on the top row for it to work. There was a square remote with the unlock button on the bottom which won't work.
thats what i have, its square and worthless