i'm not into metalwork at all. so i'm going ot have a friend of mine fab up a turbo support bracket for me for when i swap the 282 in.
anyone have ameasured drawing of theirs? i'm also goin to see what it will cost to get a few extra made.
i have a bunch of pics of mine, but no actual drawings. i can post the pics if you want.
that might help. post them up if you would please. thanks in advance
http://www.turbosedan.com/cutlass/engine/DSC01873.JPG
http://www.turbosedan.com/cutlass/engine/DSC01875.JPG
http://www.turbosedan.com/cutlass/engine/DSC01876.JPG
http://www.turbosedan.com/cutlass/engine/DSC01878.JPG
http://www.turbosedan.com/cutlass/engine/DSC01879.JPG
wow. that's pretty.
thanks for the pics!
http://members.cox.net/subliminalexistence/images/ste/DSCN0612%20(Medium).JPG
I think that's the only pic of mine I have online at the moment. the small hole was a misdrill and the welds are a little sketchy, but overall I used Josh's as a guideline to figure out what it needed to look like. I'm telling you though, it'll be difficult to have one that fits well without testing it on the tranny itself with the turbo setup in place.
well, i'm going to get the tranny in and get all the rewiring done. then i'm going to tow it to my buddy's house so we can mock it up and weld it up. at least i know now about hoe it whould look.
thanks, guys