i was looking at turbos on ebay tell me if this one will work
http://cgi.ebay.com/ebaymotors/GT28RS-BALL-BEARING-TURBO-T25-T28-240SX-S13-S14-S15_W0QQitemZ230154393222QQihZ013QQcategoryZ33742QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Don't know the quality of that turbo. I don't think it's a Garrett. Pretty sure it's a knock off. Regardless you have about 130 to 150 in adaptors for the inlet and outlet. You will also have to shorten your lower intercooler pipe because with the adapter its to long.
You also have to re plumb it which will cost you about 80.
If the adapter and banjo fitting shown comes with it then you just have 15 for the intercooler adapter plus the other banjo fitting and the oil return.
Read the feed back and make your decision. You can get a Gt28 RS that doesn't need the adaptors but it will be at least twice a much. Google turbos and look around.
Jud
i want a bigger turbo for about 500.00 or so. but not nuts big. just somthing bigger then the stock t25.
www.gpopshop.com
Tell them Kyle Krenz sent you. Decent deals and good products and service!
it this turbo bigger then the stock tgp turbo
http://cgi.ebay.com/ebaymotors/T28-TURBO-CHARGER-AR42-S13-S14-NISSAN-INTERNAL-WASTEGAT_W0QQcmdZViewItemQQcategoryZ33742QQihZ002QQitemZ120143774417QQrdZ1
A t28 is generally bigger as is a t30 over a t28. They say down the page that it's a t25. AR's are awful small smaller than your turbo. Don't matter, it won't bolt to your down pipe.
:icon_sad:
Jud
Quote from: sleeperred90tgp on July 24, 2007, 03:23:00 PM
A t28 is generally bigger as is a t30 over a t28. They say down the page that it's a t25. AR's are awful small smaller than your turbo. Don't matter, it won't bolt to your down pipe.
:icon_sad:
Jud
looks similar to the tgp down pipe whats different bout it?
Similar but different. Go to APT turbo and look at the garrett gt28 and you will see the difference.
That looks like a t3 flange of some sort. :dunno: The plate is definatly a weld on.
Jud