See Page 4 for updated parts!
Would the 10 PSI wategate work on a stock T25?
Quote from: TGP Nick on September 15, 2008, 11:48:18 AM
Would the 10 PSI wategate work on a stock T25?
yes I had to modify the actuator arm length to fit on my hybrid turbo which is the same length as a stock T25, the only thing you might have to do is drill a hole in the bracket it comes with for the stock actuator bolt spacing, that would be it.
Ken
:icon_rolleyes: It's me again. I was wondering what those injectors are out of. So I can go buy a set. And if you would happen to change your mind I would rather buy them from you.
Thanks again
Alan :icon_biggrin:
I sure hope Ken turbos the 3400, and after talking with him today I know he is thinking about it right now..... :laugh: On another note the injectors can be found on many ls1 equipped cars.. Just half to make sure it's the EV1 style connector found on many 97-01 Camaros, Firebirds and some Corvettes.. Here wtf these will work.... http://cgi.ebay.com/ebaymotors/FUEL-INJECTORS-28lb-Bosch-Design-III-corvette-ls1_W0QQcmdZViewItemQQcategoryZ33554QQihZ021QQitemZ310084441611QQrdZ1QQsspagenameZWDVW I buy from these guys all the time and I'm always satisfied.. Good luck with your project.. later
I did read your list but I was confused when you listed a crossover with new bellows and a 2.8 crossover for the ends...is this crossover intact or is something wrong with it? Do you have a complete TGP crossover that doesn't leak for sale? If so, send me your Paypal and I'll send you the money ASAP.
The first item is a "kit" that crossover does not leak, they one at the bottom is a bad crossver I was trying to sell with a 2.8 crossover to rebuild it with (the ball ends warp and leak) I guess I was not clear with that......sorry.
Yes Adam I'm "thinking" about putting this stuff on the 3400 sometime next year. I want to take my time and do everything right especially hogging out those manifolds for the D port. Just as well since I'm not getting any action on these items. Must be an omen or something ;)
Ken
Do you have a set of good tail lights? Not cracked, scratched, or faded?
No sorry no tgp body parts......
if you still have the crossover and downpipe i'll take them
Ok guys following are sold:
-fuel pressure gauge
-fuel rail
-downpipe (1 left now)
-crossover (There is one good one left, I sold the broken one)
I'm willing to separate some of the turbo kit items, let me know what you want. The BOV, Magnacores, and a few other parts I will be keeping but the rest is still for sale. Let me know what item you want and I'll work up a price.
Ken
Like I asked about before, I'll take the good crossover...what's the price?
PM Sent Grinders
didnt you sell your tpg?
Yes I did, but I'm building a....spare?....motor in my free time. By building I mean this engine will be BUILT tough and right. And by spare.....well who knows what this engine will end up in :icon_twisted:
thats pretty cool man, throw it in a lighter car , go faster for the same amount of work...
Quote from: cobracmdr on October 07, 2008, 09:11:29 AM
I'm willing to separate some of the turbo kit items, let me know what you want.
What do you want for the various powder coated pieces?
$175 will take everything chrome in the pictures
Ken
Hey Ken. I'm going to have to pass on the crossover pipe for now. Sorry but thanks for the help!
That is ok Grinders, if you are still interested pm me an offer for it and I might consider it.
Ken
FYI I put the turbo on ebay with a LOW reserve....incase anyone wants a BB turbo
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=260300815408
Ken
I'm gonna bid on the turbo.
Thanks!
Wow that was a Quick sale... Awesome Ken...
Hehehe that made my day $$$....at this rate I'll have that TGP paid for by X-mas :icon_eek: Nice!
FYI Stuff is still for sale! Let me know what you need or want!
Ken
haha that turbo would have choked your 3400 anyway. now you need a 4088!!
Updated with prices, parting out everything now. Let me know what you need!
some stuff still available let me know what you need! I got radiators and oil pans left and tons of other stuff
Is the crossover still available? If so how much. I need one soon!!
Thanks, Shawn
crossovers sold!
FIGURES, just my luck.
My radiator is starting to leak a little.... maybe its time to get one ready.... you still have the TGP radiator available???
yes I have two good units for sale, pm me for a shipping quote.
Ken
bumpy
Do You still have the Parts for sale?? i see that this thread hasnt been active for awhile... Im in need of a few things.. Basically hoses and the hard piping.. And the fuel lines that go to the rail... if your still selling ill look at your pics and give you the LIST.. Thanks
*****Ken You have a E-Mail from me*******
Quote from: 89BlackTGP on February 25, 2009, 05:29:19 PM
Do You still have the Parts for sale?? i see that this thread hasnt been active for awhile... Im in need of a few things.. Basically hoses and the hard piping.. And the fuel lines that go to the rail... if your still selling ill look at your pics and give you the LIST.. Thanks
*****Ken You have a E-Mail from me*******
I am pretty sure Ken has sold all of his TGP parts. I have several parts cars and would be willing to help you out if still needed.. Just shoot me a pm and we will go fron there...
Still have parts and will update this FS soon as I get a chance to unbox them this weekend and take pictures. I need them sold too because they are in my Dad's basement and he is pissed ;)
Ken
Great I will be waiting..
did you ever sell the turbo?
Quote from: stockgp on March 07, 2009, 04:51:36 PM
did you ever sell the turbo?
I sold the BB turbo but I have a very nice stock unit I bought off of a member on the site which I will not be using, I paid $300 shipped for it and it is polished, has a coated turbine housing, new shaft and wheels and only 5 k on it. Pictures will be up tomorrow. Sorry for the long wait guys, new job, new place to live, life happens!
Ken
nm, then. i'm looking to upgrade.
gl with your sale
Ok guys as promised I have taken inventory as to what I have. Here is the thing, I don't think I'll need any of this stuff in the near future so make me an offer on anything here. I need this stuff gone. PM me with offers!
-BFgoodrich drag radials on white gpse crosslace rims. Tires are 255/50/16 and I paid about $400 after shipping mounting and balancing. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/TGPPartsForSale103.jpg)
-(2) TGP Radiators, both tested, both don't leak I paid about $110 for one the other I bartered for. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/TGPPartsForSale102.jpg)
-Powder coated chrome valve covers for a 3.1, some coolant stains and dulling from use. Looks ok could be polished up. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/TGPPartsForSale062.jpg)
-Powder coated chrome intake manifold 3.1 turbo with EGR block off plate. Looks ok could be polished up. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/TGPPartsForSale063.jpg)
-Metra 1988-89 dash kit with Alpine CD player, tested and works. Hard to find kit if you want a single din style radio in thse year GPs. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/TGPPartsForSale094.jpg)
-Omori Boost/Vac with EGT- everything you need including electronic boost sending unit, egt thermocouple wiring and instructions. Easy to hook up, basically power, ground and backlighting everything else is plug and play. VERY accurate unit, measures in SI (Metric) units. Very nice unit normally costs $400. The porsche/audi guys use these in their cars. I got it for $200 only used for a few months was new when purchased. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/TGPPartsForSale099.jpg)
-Remanufactured stock T25 with polished aluminum housing, ceramic coated turbine housing, new wheels and shaft, balanced with only 5k on rebuild. Shaft play is very minimal it is one of the tightest T25's I have seen, and I have rebuilt a few myself. Paid $300 plush shipping from a forum member. Will ship anywhere in the US for $300.
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0284.jpg)
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0285.jpg)
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0286.jpg)
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0288.jpg)
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0289.jpg)
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0290.jpg)
-Wolf TGP bra, never used came with my red car. Not going to use it. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0296.jpg)
-3.1 Cylinder heads with new valve seals LS1 valve springs, 3100 keepers and retainers, gen 1 adjustable studs and nuts. A must have if you are planning to run a cam, prevents valve float. Comes with 1.6 ratio rockers already on them. I have about $350 in parts in these heads. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0299.jpg)
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0300.jpg)
-TGP thermostat housing, sandblasted and rewelded where they cracked. Stronger than a stock one, thermostat surface was decked as well. no idea what these are worth but I know you need them to run a turbo and this one is better than new MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0305.jpg)
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0306.jpg)
-MISC TGP charge pipe couplers MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0307.jpg)
-Factory electronic boost controller and manual boost controller. TGP Upper radiator hose silicone, great shape no leaks MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0308.jpg)
-Alternator brackets also powdercoated chrome. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0309.jpg)
-Upper radiator support for a TGP you need this it is different than NA it has the mounts for the intercooler MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0314.jpg)
-(2) sets of TGP exhaust manifolds front and rear. One of them has a broken stud on the rear manifold. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0315.jpg)
-Downpipe for TGP and before catalyst pipe with O2 bung welded on, EGR valve with tube not cracked.
MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0318.jpg)
-MISC T25 housings along with a little block off turbine deal I made for running a car NA while your Turbo is out for work. It actually works pretty nice. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0316.jpg)
-TGP oil pan with oil drain back lines. Oil pan the bottom is crushed a bit but should not effect function. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0320.jpg)
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0322.jpg)
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0325.jpg)
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0326.jpg)
-(3) TGP High volume oil pumps, one is new with only a few thousand on it and welded on pickup tube. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0330.jpg)
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0331.jpg)
-T25 oil and coolant feed/return lines MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0332.jpg)
-GPSE hood vents, not TGP they are shorter but not in bad shape could use paint MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0333.jpg)
-3.1 timing set cam sprocket and chain only, used for 5k with new damper MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0337.jpg)
-2005 Impala 3400 v6 fuel injectors off an engine with 50 k on it MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0342.jpg)
-(2) TGP computers MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0343.jpg)
-3.1 Head bolt set new MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0344.jpg)
-Brickyard spoiler, center section painted white for my 88 GP but I never got it to match right so it has never been put on on. I paid $75 for it. MAKE ME AN OFFER
(http://i196.photobucket.com/albums/aa43/hoffmk2003/tgp%20parts%20update/100_0349.jpg)
are pressure plates specific to the clutch, cuz I think I may have destroyed mine in my recent install, it seems the TO bearing was off, and now it's all seized up and shit. I bought a stage 2 kit, and most likely are going to need another new pressure plate. If it would work I would be interested in yours.
Interested in the dash cover, PM sent
Quote from: meltboy11 on March 08, 2009, 06:19:20 PM
are pressure plates specific to the clutch, cuz I think I may have destroyed mine in my recent install, it seems the TO bearing was off, and now it's all seized up and shit. I bought a stage 2 kit, and most likely are going to need another new pressure plate. If it would work I would be interested in yours.
Sorry pressure plate is sold as is the oil cooler, AC wrap around cooler pipe, charge pipe coupler, good oil pan and drain back. But the rest is still available!
Ken
If the heads are not spoken for I'll take em.. Just give me a call when you have a sec.. later man
-Adam
I might want the turbo. the seal just went in mine and has in and out play. give me a few days to adress my situation. If i dont get mine rebuilt i will pick this up. Ike
Ike let me know I have tons of stuff left including that turbo all reasonable offers accepted!!! Pm me offers
Ken
Updated with parts left. Still lots available. With a tough ecomony I'm accepting ALL reasonable offers! I need this stuff gone guys, I'll give it away if I have too I don't want it ending up in a dumpster which is what will happen if my father has his way hahah!
Ken
have a steering rack!?
no rack sorry, both steering and otherwise hahah ;)
Got two good radiators! Make me an offer you can't get these anymore!!!
Ken
Found a Topgun 160 chip which I will be more than happy to sell for $125 bucks or best offer! That is shipped anywhere in the US too ;) Any takers? Want to make your TGP fast?
Ken
the 5 speed tune on it? Looking for a tgp chip with the 5 speed tune on it
talk to flybynite about a 5 speed tgp chip.
Ken
Still have parts!! Following are sold:
Heads
Topgun160 Chip
1 Computer
Turbo
2 Good radiators, front end bra, car cover (generic), oil pan, gauges, thermostat housing (welded so it is stronger) etc.. still left let me know what you need!
Ken
Ken i think you should update your list of parts and pictures.. i dont know about everyone else but i having a hard time trying to figure out what you have left and what you sold..
Ok guys I'll update the post with what is left this weekend thank for the tip
NP.. there might be a chance ill be buying more :laugh:
Hi there, I badly need a non-cracked egr tube. How much for yours shipped to UT?
Ok guys here is the updated parts list of what I have left:
- 2 Good radiators
-1 wolfcraft bra for 89-90 tgp
-1 generic car cover fits TGP pretty well
-1 upper intake manifold says turbo 3.1 intercooled on it powder coated chrome but has scratches
-1 set of valve covers powder coated chrome but has scratches
-1 tgp thermostat housing sandblasted and welded to strengthen against cracking
-1 3 bar map sensor with harness
-1 upper radiator hose
-2 sets of exhaust manifold
-1 set of TGP fuel lines
-1 lower charge pipe
-misc turbo housings and parts let me know what you need
-1 Down Pipe
-1 egr tube and valve
-1 oil pan and drain back
-1 set of turbo oil and coolant feed lines does not come with oil feed line that connects to block of engine
-1 tranny cooler
-1 upper radiator support
-1 W-body windshield wiper motor
Make me an offer for any of this stuff I need it all gone.
Ken
-
I MAY need the tranny cooler, gotta get under the car and see specifically if its the cooler, a loose clamp, or a hose leaking.
bump got partzzzz!!!!
Is the MAP 3 BAR or a 2 BAR TGP one?
2 bar tgp one. Tested and works!
Ken
TTT Come on someone has to need a radiator! I have two I need them gone make me an offer lol! Both tested, both don't leak from southern cars!
Ken
Ken i cant believe you want all this stuff gone.. But hopefully when spring/summer hits you will be selling this stuff off as more tgps will be worked on.. PM me a shipped price for a radiator.. I dont need one but a spare cant hurt..
PM Sent I don't need ALL of this stuff ;)
well hopefully when I finally get a job you will still have some of this stuff cuz I could sure use some of it.. lol
lumpy bumpy rumpy
Well what's the list of stuff u got left? Btw my 5spd tgp is done well mostly done there's a videos on YouTube.
- 2 Good radiators
-1 wolfcraft bra for 89-90 tgp
-1 set of valve covers powder coated chrome but has scratches
-1 tgp thermostat housing sandblasted and welded to strengthen against cracking
-1 upper radiator hose
-1 set of exhaust manifold
-1 set of TGP fuel lines
-1 lower charge pipe
-misc turbo housings and parts let me know what you need
-1 oil pan and drain back (pan dented but sealed fine)
-1 set of turbo oil and coolant feed lines does not come with oil feed line that connects to block of engine
-1 tranny cooler
-1 upper radiator support
-1 W-body windshield wiper motor
-Boost/vac/EGT gauge
-CD player with dask kit for 88-89 GP
Hope this helps
Also have 2 BFGoodrich Drag Radials mounted on white cross lace rims. Have probably a dozen passes on them. Make me an offer.
Ken
Ken I need the T-stat housing and while im at it ill take the upper Radiator hose too.. I need these parts Fast.. ill pay extra for it to get here faster.. LMK You can email me if you still have my email address.. ill send u a paypal payment as fast as i can too.. Spongedude159@aol.com it will go to my iphone so i can respond quicker than here.. thanks
Hey do you by chance have a TGP T25 exhaust housing laying around? If so, let me know, I found out today that mine has a crack in it. :icon_frown:
Quote from: a1990cavalierz24 on May 20, 2009, 11:34:38 AM
Hey do you by chance have a TGP T25 exhaust housing laying around? If so, let me know, I found out today that mine has a crack in it. :icon_frown:
Yes I do but most of them have cracks by the wastegate hole. I doubt you will notice any performace loss especially with an internal wastegated turbo since most get fluttler near the boost setpoint on the actuator. But if you want one as a spare I can sell you a hot side housing in good shape with all the bolt holes in good shape.
Ken
Yeah that is where mine is cracked. I was kind of hoping to find one without the cracks there.
Still have parts guys, I need these radiators gone too......I'm almost ready to put them on ebay nr.........
How much would shipping be on a radiator to 55032?
you got a pm!