hey guys, my tranny is slippin awful and time to do somethin about it. im assuming it costs a fortune to rebuild? r there rebuild kits for it? same as regular GTP tranny? differences? possible? got a line on a used TGP tranny for $350. better off goin with a functional used one? good price? anyone in wisconsin area with experience with our turbo cars wanna rebuild it for me? any options or info is appreciated!.........scot
I would have it rebuilt and install it with a new torque converter. Parts and labor should be around $1600. You can pull it and reinstall it and save 400 or so....
new torque convertor? is there a better option than the one thats in there? also im not sure how to go about rebuilding it if its a "special" tranny for the turbos maybe its not possible with rebuild kits out there etc? wanna weigh all my options and money is a concern. i can afford the $350 used one but not a $2000 rebuild:)........scot
Quote from: flybynite on May 19, 2009, 06:22:03 PM
I would have it rebuilt and install it with a new torque converter. Parts and labor should be around $1600. You can pull it and reinstall it and save 400 or so....
x2
I rebuilt mine with all the latest updates, "Red" clutches, Phantom Grip LSD, & a 500 rpm higher stall, cost me around 1K
Quote from: GPChief on May 19, 2009, 06:58:57 PM
x2
I rebuilt mine with all the latest updates, "Red" clutches, Phantom Grip LSD, & a 500 rpm higher stall, cost me around 1K
We did about the same, no LSD and 1,000 rpm higher stall, of course that was for a built engine, hopefully the stall isn't going to be too high for the stock engine. The bigger turbo will hopefully be big enough to need the higher stall.