I sent out my Cross-Over and PCM to Kenny on April 24th 2009 along with 2 money orders. One for the amount for the Cross-Over rebuild, and one for the Hot Tune Chip (prices as discussed through PM). When I mailed them out I was told that your average turn around was 5 days. I used a delivery confirmation to be sure he received them and he did. I waited patiently for a few weeks before PM-ing Kenny to find out how things were coming, and did not receive a response until May 19th 2009. The response I received had many excuses, most of which seemed valid and offered piece of mind for the time being. I have since not heard from him at all. I waited about another month before sending another PM sometime mid-June looking for an update, to which I never received a response.
Kenny,
I like to believe I am a very reasonable person, and pretty patient, but I really wanted to get the car done this summer. Living in Buffalo I do not have many months out of the year to drive in nice weather. I understand you are busy, and so am I. I understand that things out of your control have lead to delays. But as a business professional you do have some obligation to keep your customers informed of what may be going on. Now since I have not gotten a response from you I have seen a few things that leave a bad taste in my mouth....
1. You have my money, and my parts.
2. You have not answered my PM.
3. You have not attempted to inform me of what is going on.
4. Both contact #'s I have for you are out of service.
5. Your website is down.
Please let me know what is going on.
Thanks,
Justin
PS: I really am not one to make a thread about this type of thing, because this really did not need to be public. But with no contact, and no response to my PM, I feel as if I have no other choice.
I am in the same boat, sent my crossover in April but there was a change in address, it arrived at the correct address on 04/28/2009.
Hopefully things work out.
SEND ME YOUR JIG AND WHERE YOU GET BELLOWS AND ILL TAKE OVER THE X-OVER REBUILDING..
X2 I would also have no problem taking over the Cross-Over business.
i have a spare engine/heads/dp i use as a jig. If anyone really needs a DP done im already set up for it. My friend does awsome welding. the welds look better than factory.
Quote from: desert sling on July 27, 2009, 01:50:52 PM
I am in the same boat, sent my crossover in April but there was a change in address, it arrived at the correct address on 04/28/2009.
Hopefully things work out.
Did you get yours yet? I have not.
Left you a PM. You guys should get them Monday or Tuesday. My wife sent them with delivery confirmation...not tracking. Sorry.
Anyone wants to buy my jig they are more than welcome. $500 takes it. Considering it would only take two cross-overs to be in the black on your investment...it is an easy though for the price.
-Kenny
Quote from: TGPilot on August 10, 2009, 07:56:45 PM
Left you a PM. You guys should get them Monday or Tuesday. My wife sent them with delivery confirmation...not tracking. Sorry.
Anyone wants to buy my jig they are more than welcome. $500 takes it. Considering it would only take two cross-overs to be in the black on your investment...it is an easy though for the price.
-Kenny
I received my Cross-Over, but no PCM, and the cross-over has a small issue. PM sent.
Desert Sling,
Did you get a PCM and a cross-over? Just let me know. If you did...keep it and I will get a PCM out to 01AudiS4. If you did not I need to know as this will mean 01AudiS4 got the right package with a PCM in it.
-Kenny
not to hijack, but as I do not have the skills to repair crossovers, if someone buys it, I'll have a crossover to get repaired.
I still have no PCM.
I have another one and will send it this week.
-Kenny
Justin,
Scott (Desert Sling) is sending your PCM and chip.
Thanks,
-Kenny
Thanks for the update. I hope you don't feel like I'm some asshole for doing this. It is just a lot of money and hard to find parts. I will let you know when it arrives and how it works.
how much is a x-over going for these days and down pipe.
No worries Justin. I completely understand and would have done the same thing.
It looks as though I am selling my x-over jig locally to a master fabricator I used to use all the time. He has said he has no problem taking orders and making them for folks on this board. I just do not have the time anymore and it has shown severely with this last few I have made.
To the gent asking how much...$365 still.
-Kenny