I have the BIN file, but when I upload it, I got no idle. Does anyone have the file they would like to send me.
No bin here, but maybe I can help with your trouble.
What chip are you using? Does it require an offset, jumper moving etc?
You sig says you have a 3 bar map, how have you modified your bin accept this?
Have you burned a working bin to this chip previously?
What do you mean by you have no idle. Does that mean it starts and idles poorly, or will not start and idle at all.
I know that RobertISaar on w-body has a good working copy. He's not registered here though. I'll pm him for you and see if he can send it to me.
http://mlobxw.blu.livefilestore.com/y1pByc-tjmgi69x5hSK0hpCs3aWJ1zYOzNQ2eejQv7cVCAFW1wpvXfXxNxpPH8T_5cvBI0dvhLVGI7WBVUalBa4pkKd3iymdrsM/TG160good.bin?download&psid=1
That link should work.
QuoteNo bin here, but maybe I can help with your trouble.
What chip are you using? Does it require an offset, jumper moving etc?
You sig says you have a 3 bar map, how have you modified your bin accept this?
Have you burned a working bin to this chip previously?
What do you mean by you have no idle. Does that mean it starts and idles poorly, or will not start and idle at all.
Right now I am not running the 3 bar. Tried switching to 59code, but
I was having issues. Right now I am on the stock tune. I have an emulator for tuning. It will start if I hit the throttle and keep it above 1700. If I let off the pedal it will die. Runs fine on stock tune. Maybe I just need to bite the bullet and let flybynite tune it. I was tring to be different, but I don't have the time. :icon_sad:
Quotehttp://mlobxw.blu.livefilestore.com/y1pByc-tjmgi69x5hSK0hpCs3aWJ1zYOzNQ2eejQv7cVCAFW1wpvXfXxNxpPH8T_5cvBI0dvhLVGI7WBVUalBa4pkKd3iymdrsM/TG160good.bin?download&psid=1
That link should work.
Can't get it to work.
http://public.blu.livefilestore.com/y1pfZUM2JhFGZotGfsxthmqbE2Nzh8Q57V29_gZLFPeplrWJBV8R8ZwhdFmfNqWdQF52tRFEwB6c9-_ciWL6YEXng/TG160good.bin?download&psid=1
DL it quick before the freakin url changes again
:flipa: @ Microsoft