My Functions for my seats do not work. I can hit the switches for all of the functions and I can hear a relay type clickimg noise but nothing happens. A lot of the switch components had gotten wet once and I had to replace a lot of them. I had replaced the switch for the seats (Complements of TGPilot) and still no change. He had verified the switch was working already, so it has to be something else. Does anybody have any ideas?
PS I am also looking for a switch for the power mirrors and the positioner switch for the drivers side seat.
Any help will be greatly appreciated
There is a little air pump under the driver seat that inflates the bellows. Do you hear that running? If not then its either bad, or had a bad connection. Otherwise, I would check the wires for the seat controls and make sure none of them are broken in the center console.
If you can hear the pump running and nothing happens still, then you need to check your air lines under the seat. This may be easier with the seat removed.
Chris
Mine did that and I also thought the switch was ok. I was putting a new console in anyway so I left it. Well with the new switch the seat controls would work half the time. Found that where the wires bend by the hinge on the console they were all broke inside the insulation. Cut them all off where they were broke and spliced them with butt connectors. They have worked fine since that. Except the headrest, which hasn't worked on either seat since I got the car. Any idea what that might be?
Quote from: redturbo90They have worked fine since that. Except the headrest, which hasn't worked on either seat since I got the car. Any idea what that might be?
Its possible that the tube came off inside the seat to pump it up. It just sticks on to the end of the rod that the headrest mounts to the seat with, so if someone tried to remove the headrest for some reason, the tube probably came off.