Hi guys im new to the turbo setups i am turboing my beretta. 3.1 an i have a fully ported top end 65mm throttle body 260 cam and im running 55 psi of fuel pressure also plan on geting a 60 or 63 trim turbo my question is what size injectors whould work with this setup? Any info would be great thanks everyone
I have had good results from the early model 28lb injectors from a standard ls-1. You could also utilize larger 36lb design III injectors to be safe, depending on boost levels. The 4T60 is not known for it's durability in high torque situations.
I plan on not going any higher than 12 dont wanna over do it