Print Page - ABS pump relay

Title: ABS pump relay
Post by: florida_tgp on February 14, 2003, 12:00:15 PM

Where is the relay for the ABS pump located, what do i have to remove to get at it?
i am getting occasional ABS light, and know the pump is failing to run when this happens. Jeff M talked about taking it apart and cleaning contacts.

Title: ABS pump relay
Post by: turby on February 14, 2003, 02:14:13 PM

The relay on mine was underneath the PM III unit. If you unbolt the heatshield and move it around you might be able to get to it.

Title: ABS pump relay
Post by: idbeast on February 14, 2003, 05:07:05 PM

The relay Jeff was talking about is located in front of the drivers shock tower, and behind the windshield washer reservoir, under a black cover that says something about ABS fuses& relays as I remember :oops:

Title: ABS pump relay
Post by: turby on February 14, 2003, 05:27:59 PM

Oh, that one. Sorry. :oops:

Title: not solenoid
Post by: florida_tgp on February 15, 2003, 08:53:16 AM

the easy to get to relays(two inside black box on driver side) are labeled solenoid relays, i'dbet it
is the difficult one that is the pump relay

Title: ABS pump relay
Post by: turby on February 15, 2003, 09:16:07 AM

That's the one I was talking about.

Title: ABS pump relay
Post by: Chris A on February 15, 2003, 11:54:03 AM

I'm pretty sure Jeff meant the pump relay on the PMIII itself, since its the pricey one. The solenoid relays are standard 30 amp automotive relays.

TGPForums.com

GENERAL => Problems & Solutions => Topic started by: florida_tgp on February 14, 2003, 12:00:15 PM