Fast! I need a TGP Gauge cluster, or parts from one cheap!

Started by LukeZ34, January 14, 2004, 12:30:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

LukeZ34

I busticated the gauge cluster in my TGP while I was installing my keyless entry. An IC on the board decided to puff the magic smoke when it was shorted out accidentally, and I am unable to find a replacement to solder in it's place.
I need either the rear board from the TGP cluster (and the black cover that protects it), or the entire cluster itself. Mileage on the car does not matter.

Thanks!!
Former owner of 2 TGP's..


2006 Pontiac Grand Prix GXP -41k, Transgo Shift kit, auxiliary trans cooler, DiabloLew Tuned.

1987 Suzuki Samurai JX Tintop - Weber DGV5E carb, 2" exhaust, Calmini Header, 162k

95GTP

Which chip?  I am going to strip one down (cluster) to get mine fixed, need to fix the speedo, check gauges light/low fuel, swap the odometer to the original one.  I will rob good parts from one and I'm sure there will be some stuff left over.  I'm not going to do this anytime soon since its too freakin cold here in maine now and I dont want to crack any plastic stuff.

Let me know.

4PASNU

Mike Ruckhaber
Currently own a 1990 Black TGP Stock.
Previous owner of a 1989 TGP: FFP Dogbones, K&N, KVR rotors/pads. Exhaust: 3" hi-flo cat, Dynomax 2.5" Ultra Flo mufflers. 
2000 GTP

TGPilot

:shock: With only 67,xxx miles on the ticker too! :shock:

LukeZ34

That one looks pretty nice. Not even a scratch on the front lens.
I've got the rear board from a cluster in the mail, but I bid on that anyway. I'd love to have a scratch free cluster.  :D
Former owner of 2 TGP's..


2006 Pontiac Grand Prix GXP -41k, Transgo Shift kit, auxiliary trans cooler, DiabloLew Tuned.

1987 Suzuki Samurai JX Tintop - Weber DGV5E carb, 2" exhaust, Calmini Header, 162k