Snapped bolts

[GOT2B GM]

Ya, like I said before, there are tons of 3.1s at my local junkyard up here cobra too, so if you, or anyone needs any 3.1 items, let me know, I usually go there at least once a week. In fact there is a 91 GP with the goldlace rims, but one is damaged, but I was still thinking of pickin em up to hang on to.
not to mention cobra, I am only like an hour and a half from you in Utica if you ever really needed anything big. IIRC you are in binghampton righ?

Your challenge, should you choose to accept it, is to find me a vacuum harness clip on one of those 3.1's

[grinders_18]

Is that a stock piece and what year vehicles/which engine (3.1 or 3100) has it?

[GOT2B GM]

2.8 and 3.1 MPFI its a stock piece

[meltboy11]

Ya, like I said before, there are tons of 3.1s at my local junkyard up here cobra too, so if you, or anyone needs any 3.1 items, let me know, I usually go there at least once a week. In fact there is a 91 GP with the goldlace rims, but one is damaged, but I was still thinking of pickin em up to hang on to.
not to mention cobra, I am only like an hour and a half from you in Utica if you ever really needed anything big. IIRC you are in binghampton righ?

Your challenge, should you choose to accept it, is to find me a vacuum harness clip on one of those 3.1's

what do you mean by clip, the whole black piece that goes on the TB?

[GOT2B GM]

yea the black plastic piece that holds the vacuum lines from popping out of the TB

[grinders_18]

I need to find one too lol...zip ties get old.

[meltboy11]

I may be going up there this weekend for somethin for my BU, i'll let ya know

[mfewtrail]

Your challenge, should you choose to accept it, is to find me a vacuum harness clip on one of those 3.1's

Pretty sure our clip is specific as we have one more vacuum line vs. the NA cars.

EDIT: I forgot about the early 2.8/3.1 cars....maybe they do have the same clip as us. I know my '93 only has three vacuum lines at the throttle body, but I assume the 88-90ish models should have four.

[TGed]

That clip only came on the turbo engines since BOOST is passing through all those holes.  Without it, it will pop out and well you know the rest.

[mfewtrail]

That clip only came on the turbo engines since BOOST is passing through all those holes.  Without it, it will pop out and well you know the rest.

That's what I was thinking too, but people on the W-body board have mentioned clips(three vacuum line versions) on the NA cars(Berettas I believe) before....

[TGed]

Beretta NEVER received that clip.  It did have both types of rubber piece depending on year (digital egr vrs vacuum) .

[meltboy11]

well I looked at my moms 91 regal and it is different than mine, I didn't make it to the yard this weekend, we got a lot of snow today and I didn't feel like freezin my ass off up there...lol but I may be goin up in the next few days if it gets nice out... but ya I think my old 91 prix had only the 3 lines too, not 4... so idk if I will find one, they may be turbo specific...

[TGed]

All you have to do is swap the top plate on the TB over to the "new"r TB.  That's it.  You now have a TB compatible with your TGP!

[meltboy11]

Well if you still want, I will be goin up there once we get a halfway decent day I'll grab a few, they are small.

[cobracmdr]

I have never seen that clip before and my na 2.8 gpse (88) does not have it and my car was cherry with low miles when I got it.  I think you boys are going to be using zip ties, unless you find a tgp in the yard you are not going to find it.