Hello all, my namde is Domenic and I am currently in the process of building my turbo Cavalier (1989 Cavalier Z24) with non other than Mr. Curtis Walker.  He's a good friend of mine.  We had trouble locating the Original T-25 that was used on the TGP's.  I will be forced to use a T3, which isn't bad, but I am aiming to use the stock T25 on the TGP's.  If anyone has any info on attaining a stock TGP in good shape, or if anyone is selling one, please email me asap at domenicz24@yahoo.com.   I just recently got the rear exhaust manifold, and now the core longblock is about to be rebuilt.  Also, who is this TGPilot guy?  I have a 5-speed cavalier, and I do have the original TGP ECM, but if I heard right, he has a chip that might directly work with my existing cavalier ECM?  Saves Curtis and I the time of swapping the ECM's and all the wiring.  Any info is appreciated.   Thanks again to all.

Hello..sounds like you are in the process of a really cool project! When I want to get my blood pumping I watch Curtis' 12 sec 1/4 mile run!! That is awesome!!

Anyway I don't know if the cavalier ECM will allow the TGP EPROM, but you are more than welcome to the 5-Speed TGP chip I have. I can either send you the .bin for the EPROM or you can send me a MEMCal and I can erase and burn the .bin for you at my work. It is free of charge other than you sending an envelope with the MEMCal that has postage already on it for it's return to you... 8)

Have you looked or asked in the For Sale part of this site. I am sure you'll get quick turnaround there. Good luck with your project.

TGPilot can you burn my chip for me?  I have the editor but I am still figuring out how to correct the speedo, raising the rev limiter, fan on temp, and making the Wastegate selinoid work on my ecm. I doute that Mr. Jeff will make a costom chip or anyone for that matter for my GTU.  All I need is for someone to burn it for me after I finish the .bin file. THis is more of a drivability chip for my car only.

I will send you the memcal with a eeprom not the UV eprom so it will be clear without erasing for a long time, or a clear UVone. This is if you want to but it won't be for a while.

I am still thinking though of using the mass meter since it seem to fuction when I connected it to the turbo chip. But that will take time.

Thanks

No problem. I like helping people enjoy their cars...not making a profit from them. When you are ready for the chip to be burnt send me an email and we will get it done for you. If you want to send me the MEMCal complete I have an adapter for the eprom station. I can burn a plain chip also for you. Have you run Mick's GMPCM program. I use it for tinkering on my chip and really enjoy using it. http://mwbackus.home.attbi.com/main.htm

Let me know and we will get you setup... 8)

Thanks. I do have GMPCM but the unregistered one. Prob register it later. I am useing winbin. I am just reprograming all the eazy stuff, correcting speed cluster , fan on,rev limit, top speed limit, and making the Wastegate work. I got a TGP code off the other TGP site. Don't know if its the high performance one though.

I'll send you just the corrections I make so my car will function right. Later I will make the mass work and the wastegate work when I have time to make the burner. I am a electronics hobbies too.

Thanks again.