How to remove drivers A-Pillar???

Started by 90TGP, July 08, 2003, 09:27:55 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

90TGP

July 08, 2003, 09:27:55 PM
How do you remove the drivers side interior A-Pillar?

Chris A

#1
July 08, 2003, 10:43:49 PM
Carfully pry it off. Its only held in with clips.

tyroelite

#2
July 09, 2003, 10:04:41 AM
Quote from: Chris ACarfully pry it off. Its only held in with clips.

Make sure that is CAREFULLY  On these older cars, those clips tend to break pretty easily. The person who owned my car before me removed it at some point and snapped a few off then hot glued the piece back in place. Imagine my surprise when I tried to pry it off and found it wouldn't go back on!

no1kicker

#3
July 09, 2003, 11:46:33 AM
there are also two small 7mm? bolts next to the dash.


former owner of a 1990 Grand Prix STE Turbo

tyroelite

#4
July 09, 2003, 12:30:36 PM
Quote from: no1kickerthere are also two small 7mm? bolts next to the dash.

I didn't see any bolts on mine...Maybe the last person just never put the bolts back in

LukeZ34

#5
July 09, 2003, 12:31:00 PM
I don't remember any bolts, but one of the clips broke on mine the other day. Had the same problem with those clips breaking in my cutlass.  :evil:
Former owner of 2 TGP's..


2006 Pontiac Grand Prix GXP -41k, Transgo Shift kit, auxiliary trans cooler, DiabloLew Tuned.

1987 Suzuki Samurai JX Tintop - Weber DGV5E carb, 2" exhaust, Calmini Header, 162k
1999 Chevy Tahoe - Daily Driver 140k
2013 Chevy HHR LT - 230k
2011 Dodge Caravan - 192k
Previously owned: - 1993 Lumina Z34, 1994 Cutlass Supreme Convertible, 1990 TGP 5 Speed, 1991 GTP, 1990 TGP, 1996 GTP, 2004 Impala SS, 1998 Bonneville SSEi, 2005 Bonneville GXP

Chris A

#6
July 09, 2003, 05:44:25 PM
There should be no screws on it. Someone may have used screws at some point to help it stay put.
Print
Go Up Pages1
User actions