FS: 3100 Parts, L36 Parts, Other Random Things *PRICES REDUCED 9-15*

[The Burning Rom]

Well, it's time to clean out the parts room.  :icon_neutral: I figured since there were some TGP parts, I'd post everything here first...give the people that may need some the first shot at em before I post them on w-body and clubgp. Post, PM, or email me if you're interested in anything.

3100 Block/Rotating Assembly/Cam/Pan & Engine Stand - (NO SHIPPING) *SOLD*
Pulled from a '95 Cutlass. Around 130,000 miles if I remember right. I bought it for a turbo project, but decided not to go through with it. Definitely needs a cleaning! Pistons look good. Turns over smoothly. Stand goes with it. I already have 2, don't need a third.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-block-and-stand-01.jpg

*ALL THE 3100 PARTS BELOW ARE FROM THE MOTOR PICTURED ABOVE*

3100 Rockers/Pushrods/Lifters - $20 Shipped
Separated into bags (1 matching pushrod/lifter/rocker per bag), with a map of where they came off of the motor.
(NO PICTURE)

3100 Heads - $35 + Shipping
They aren't too dirty. They could use some cleaning though. Everything on them looks good.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-heads.jpg

3100 Lower Manifold - $8 + Shipping
What can I say? It's a lower manifold.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-intake-manifold-01.jpg
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-intake-manifold-02.jpg

3100 Exhaust Manifolds & X-Over - $10 + Shipping
Manifolds and crossover with heat shields.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-exhaust-manifolds.jpg

3100 Flexplate - $12 Shipped
Good condition. No broken or missing teeth.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-flexplate.jpg

3100 Fuel Logs - $6 Shipped
The pipe that connects the two logs is kinked. The harness that's attached is also destroyed (was when I bought the motor). The rails could possibly be repaired or used for parts. I'm not sure if the injectors are any good.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-fuel-rails.jpg

3100 4t60e Torque Converter - $10 + Shipping
From the transmission that was attached to the motor. I actually have the whole transmission if someone wants to pick it up. It's missing 3rd gear. :( If nobody takes it off my hands soon I'm going to scrap it out and sell the aluminum case for scrap (it's 85 cents a lb here!)
http://www.neonix.org/nero/pictures/itemsforsale/carparts/4t60e-3100-converter.jpg

3100 EGR Valve - $8 Shipped
Looks to be in good condition
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-egr.jpg

3100 Belt Tensioner - $8 Shipped
Good condition.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-tensioner.jpg

3100 Plastic Pieces - $5 Shipped *SERPENTINE BELT DIAGRAM IS SOLD*
They're pieces...of plastic. Starter cover...oil bib...one other piece.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-plastic.jpg

3100 Waterneck - $7 Shipped
Waterneck...from a 3100
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-waterneck.jpg

3100 Engine Mount Brackets - $5 + Shipping
Could use a blasting and repaint!
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-engine-brackets.jpg

3100 Alternator Bracket - $7 Shipped
Aluminum alternator bracket. Includes all the bolts.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/3100-alternator-bracket.jpg

Driver side lock panel - $5 Shipped
From a 92 Grand Prix Coupe
http://www.neonix.org/nero/pictures/itemsforsale/carparts/dr-side-lock-plate.jpg

Driver side switches - $8 Shipped
Switches from a 92 Grand Prix Coupe. Power Windows, Power Locks, Power Mirrors. Face plate has a few scratches and is dirty.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/dr-side-switches.jpg

Driver side door light - $4 Shipped
From a 92 Grand Prix Coupe
http://www.neonix.org/nero/pictures/itemsforsale/carparts/dr-side-door-light.jpg

EGR Tube - $3 Shipped
I'm not quite sure what it's from. The only engines I've ripped apart have been 3100s and 3.1s, so it's gotta be from one of those.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/egr-tube.jpg

PCV Breather - $4 Shipped
I'm guessing it's from the 3100, but I can't remember.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/pcv.jpg

L36 Heads - $40 + Shipping
Heads off of a 2000 Grand Prix GT. Around 40,000 miles on them. No springs or retainers. Good for porting (the reason I bought them). I'm going with a set of stage I Milzy heads though and no longer need these.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/l36head-01.jpg
http://www.neonix.org/nero/pictures/itemsforsale/carparts/l36head-02.jpg
http://www.neonix.org/nero/pictures/itemsforsale/carparts/l36head-03.jpg
http://www.neonix.org/nero/pictures/itemsforsale/carparts/l36head-04.jpg

97-03 SE, GT, GTP Speaker Grille - $4 Shipped
Brand new, NON BOSE cover.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/gt-gtp-speaker-cover.jpg

97-99 (and maybe newer?) Steering Wheel Control - $7 Shipped
Works fine. Some of the grey is worn off and the white writing is dirty. Was replace for cosmetic reasons.
http://www.neonix.org/nero/pictures/itemsforsale/carparts/steering-wheel-controls.jpg

[Prospeeder]

ohhh damn i want that BOV and flange, but i cant afford it right now, i bought a Valence

[RareGMFan]

Oh man, I'm eyeing up that BOV and flange, as well.  Would that circle get cut off the flange before welding it to a charge pipe?  And what does the stock G1 DSM BOV handle pressure wise?

[TGPilot]

A 1G DSM BOV will handle anything a TGP with a T-25 or T-28 can throw at it and then some. I installed a used one on my TGP 4 years ago and it still works perfectly without a hint of leaking with 14 PSI set boost.

[The Burning Rom]

Oh man, I'm eyeing up that BOV and flange, as well.  Would that circle get cut off the flange before welding it to a charge pipe?  And what does the stock G1 DSM BOV handle pressure wise?

No, the circle is what what you'd weld to the charge pipe.  ;)

[RareGMFan]

Oh man, I'm eyeing up that BOV and flange, as well.  Would that circle get cut off the flange before welding it to a charge pipe?  And what does the stock G1 DSM BOV handle pressure wise?

No, the circle is what what you'd weld to the charge pipe.  ;)

I had a feeling you were going to say that, lol.  I just couldn't remember/picture that part on any of the photos I've seen of those installed on TGPs.  Let me get my cradle bolts/bushings and starter issue resolved (hopefully by this weekend), and I will more than likely pick those up off ya'.  I just want to make sure nothing goes wrong with the cradle issue (bolt breaking while trying to change them out) that would cause me an enormous, unexpected expense.

[The Burning Rom]

BOV and Flange sold...pending payment clearing. Sorry guys.

Everything else is still for sale though. I will consider all reasonable offers!

[The Burning Rom]

AC Compressor, PS Pump, and Headlight Adjuster Covers sold pending payments.

I have a few people interested in:
Intercooler
Charge Pipe
TGP Waterneck
3100 Heads
3100 Bypass Pipe

EVERYTHING else is still available. I will consider all offers! :icon_cool:

[The Burning Rom]

TTT - Prices reduced.

[herb427sc]

If the deal falls through on the TGP thermostat neck, I would like it.

[The Burning Rom]

If the deal falls through on the TGP thermostat neck, I would like it.

He hasn't responded to my PMs, and it's been a week...so as far as I'm concerned it's yours. I'll PM you with payment details as soon as I hit the POST button.  :icon_biggrin:

[The Burning Rom]

TGP Waterneck is sold!

[The Burning Rom]

TTT - I will consider all reasonable offers. :icon_neutral:

[The Burning Rom]

TTT

All the TGP parts have been sold!

The 3100 block and Camaro intake manifolds are now listed on ebay!  ;)

[Tooky]

Hey I'm interested in the "3100 Rockers/Pushrods/Lifters - $25 Shipped"

Are these the 1.6 ratio that will work directly on the TGP?  If so consider them sold.  Email me: tookycat@nconnect.net or reply here if that doesn't work.  Thanks,

Josh